Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Quick-Acting Hardwood Bench Vise with Cam and Drop Roll (Boy Mechanic, 1919)
A home-made bench vise entirely of hard wood: the front jaw slides in and out on arm C, a loose roll A drops into place to lock it, a cam lever in front gives the final squeeze, and the pivoted jaw B tilts to grip work whose sides are not parallel.
Середній
A day
Інструкції
1
1
Sizes in mm
Sizes in mm
Завантаження блокнота Jupyter…
2
2
Read the Boy Mechanic
Read the Boy Mechanic
"A detail is given of each part, with dimensions, so that it is not difficult to make it from hard wood."
3
3
Cut the parts to the drawing
Cut the parts to the drawing
Cut every part from hard wood to the sizes in the drawing: the 6-1/2 x 7-3/8 x 3/4 in plate with its 2-5/16 x 2-7/16 in opening, the 6-1/2 x 4 x 1 in slotted plate, the 5 x 5-1/2 x 1/2 in plate, the blocks, the forked piece, the long bar drawn at the bottom (2 x 1-3/8 in; we take it to be arm C) and the cam lever (5-1/2 in between centres, 5/16 in pin hole; its edge view is drawn 5/8 in).
Матеріали для цього кроку:
Дошка з твердої деревини1 штукаНеобхідні інструменти ({count})
Ручна пилка
Лобзикова пилка
Стамески
Коловорот із перкою4
4
Turn roll A
Turn roll A
Make roll A, a round hardwood roll 1-1/16 in across and 1-7/8 in long.
Матеріали для цього кроку:
Шканти з твердої деревини1 штукаНеобхідні інструменти ({count})
Ручна пилка5
5
Assemble under the bench
Assemble under the bench
Fit the parts under the bench top as the section view shows: arm C slides through the fixed part, roll A sits in its curved seat behind the jaw so it can drop and wedge the arm, jaw B is pivoted so it swings loose, and the cam lever is pinned at the front. Screw and bolt the fixed parts to the bench.
Матеріали для цього кроку:
Шурупи по дереву1 штука
Болт із півкруглою головкою1 штукаНеобхідні інструменти ({count})
Коловорот із перкою
Молоток6
6
Use it
Use it
To open: turn the cam, then lift the front of the vise to free roll A, and slide the front jaw out to the size of the work. Put the work in: roll A drops into place and clamps arm C. Turn the cam to tighten.
7
7
Troubleshooting
Troubleshooting
Wooden vise troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 3** (Popular Mechanics, 1919), p. 85, by J. C. Hansen (checked on the archive.org scan boymechanic0003unse). The text names only roll A, jaw B, arm C and the cam; build the other pieces as drawn. Metric figures are ours.
Матеріали
4- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
За цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

