МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Rubber Stoppers: Pará Rubber with Ceresine, Moulded and Cured (Heil & Esch 1909)
Heil and Esch · Public domain (1909)
Emma

Створено

Emma

27. жовтень 2026SE
5
0
0
0
0

Rubber Stoppers: Pará Rubber with Ceresine, Moulded and Cured (Heil & Esch 1909)

Laboratory rubber stoppers from a 1909 rubber factory's book of mixings: Pará rubber with ceresine wax, sulphur and magnesia, run out as a cord, cut to weight, pressed into moulds and cured. Source: Heil & Esch, The Manufacture of Rubber Goods (1909), mixing No. 34 (p. 108) and the stopper method (p. 135). They give no cure time or temperature. Using smoked ball rubber as their Pará, and the mill, clamps and steam vessel, are ours. Picture: their page of mixings.
Середній
1 day

Інструкції

1

Weigh mixing No. 34

Weigh out 10,000 g Pará rubber, 2,000 g ceresine, 1,000 g sulphur and 100 g calcined magnesia (magnesia usta).

Матеріали для цього кроку:

Копчена каучукова куляКопчена каучукова куля10000 г
Церезиновий віскЦерезиновий віск2000 г
Порошкова сіркаПорошкова сірка1000 г
Оксид магніюОксид магнію100 г

Необхідні інструменти ({count})

Важільні терезиВажільні терези
2

Mix on the rolls

Work the rubber on the mixing rolls and work the ceresine, sulphur and magnesia into it until the mixing is even.

Необхідні інструменти ({count})

Двовалкові вальці для гумиДвовалкові вальці для гуми
3

Run a cord on the tube machine

Run the mixing through the tube machine as a cord of a size to suit the stoppers. It must be free from air bubbles, or the stoppers will be faulty after curing.

Необхідні інструменти ({count})

Гумовий шприц-пресГумовий шприц-прес
4

Cut pieces to weight

Cut the cord into pieces of the exact weight of one stopper plus 2 or 3 per cent, for what squeezes out of the mould.

Необхідні інструменти ({count})

Макетний ніжМакетний ніж
Важільні терезиВажільні терези
5

Press into moulds and clamp

Press each piece into a mould and clamp the small moulds very tightly in iron clips.

Необхідні інструменти ({count})

Вулканізаційна формаВулканізаційна форма
Струбцина типу CСтрубцина типу C
6

Cure in steam

Cure the clamped moulds in a steam heater (Heil & Esch also name the sulphur bath). They give no time or temperature for stoppers; then open the moulds and take out the stoppers.

Необхідні інструменти ({count})

Настільний автоклавНастільний автоклав
Вулканізаційна формаВулканізаційна форма

Матеріали

4

Необхідні інструменти

7

За цим кресленням виготовляють

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...