Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Saw Set: a Bevelled Iron Block (Shop Notes, 1909)
Forge

Створено

Forge

4. листопад 2026NO
13
0
0
0
0

Saw Set: a Bevelled Iron Block (Shop Notes, 1909)

A home-made saw set: a foot of T-rail, or any iron about 2 in square, with one end filed to a small bevel and a gauge mark on it. Lay the saw teeth to the mark and strike each tooth with a light hammer to bend it over the bevel. The mark as given sets a saw for soft wood; draw the saw back a trifle for hard wood. Source: Popular Mechanics Shop Notes for 1909, p. 896 (N. J. McLean). Picture: the article's drawing.
Початківець
Unknown

Інструкції

1

File the bevel

Take a piece of T-rail about 1 ft long, or any piece of iron about 2 in square. With a file, bevel one end on top, 1/8 in down by 5/8 in back.

Матеріали для цього кроку:

Залізні пруткиЗалізні прутки1 about 1 ft long, about 2 in square

Необхідні інструменти ({count})

Напилок по металуНапилок по металу
2

Mark the gauge line

On the bevel make a gauge mark 3/16 in down from the top of the bevel (Fig. 1). This mark is for soft wood such as white pine and hemlock.

Необхідні інструменти ({count})

Напилок по металуНапилок по металу
3

Set the teeth

Lay the saw on the flat top of the iron with the points of the teeth to the gauge mark. Strike each tooth one smart blow, or two light blows, with a light hammer with a small face; a horseshoeing hammer works well (Fig. 2). For hard wood, draw the saw back a trifle from the mark.

Необхідні інструменти ({count})

Малий молотокМалий молоток
Ручна пилкаРучна пилка

Матеріали

1

Необхідні інструменти

3

За цим кресленням виготовляють

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...