Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Silk-Thread Hygrometer with a Magnifying Sag and Pointer (Boy Mechanic, 1913)
A humidity indicator from a silk thread stretched with a slight sag between two nails: as dry air shrinks the silk, the sag straightens and pulls a second thread wound round a pencil-sized axle, swinging a pointer over a scale.
Початківець
An hour
Інструкції
1
1
Why the sag magnifies
Why the sag magnifies
Завантаження блокнота Jupyter…
2
2
Read the Boy Mechanic
Read the Boy Mechanic
"A very small shrinkage of B, such as occurs when the atmosphere is dry, will cause an increased movement of C."
3
3
String thread B
String thread B
Drive a nail at each end of a board A and stretch silk thread B between them, not quite straight: let it bend a little toward the pointer bracket D.
Матеріали для цього кроку:
Соснова дошка1 штука
Шовкова нитка1 штука
Цвяхи1 штукаНеобхідні інструменти ({count})
Молоток4
4
Make the pointer axle
Make the pointer axle
Cut a round wooden axle about the size of a lead pencil and drive a pin into each end. Cut a piece of tin E V-shaped at each end and bend the ends up as bearings for the pins; fix it on bracket D. Fix a light pointer on the axle.
Матеріали для цього кроку:
Шканти з твердої деревини1 штука
Кравецькі шпильки1 штука
Лист білої жерсті1 штукаНеобхідні інструменти ({count})
Ножиці по металу
Плоскогубці
Ручна пилка5
5
Connect thread C
Connect thread C
Tie a second silk thread C to the middle of B, fasten it to the axle and wrap it once or twice round, so pulling C turns the pointer over a scale card.
Матеріали для цього кроку:
Шовкова нитка1 штука
Картонні аркуші для шаблонів1 штука6
6
Read it
Read it
When the air dries, B shrinks and straightens, pulling C and swinging the pointer; damp air lets it back. Mark the scale against a known hygrometer if you want numbers.
7
7
Troubleshooting
Troubleshooting
Hygrometer troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 1** (Popular Mechanics, 1913), pp. 71-72 (checked on the archive.org scan boymechanic0000unse_n5a8). He gives no sizes or calibration; ours are marked.
Матеріали
7- 1 штукаЗаповнювач
- 2 штукЗаповнювач
- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
Необхідні інструменти
4- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
За цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

