Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Knock-Down Tennis-Court Backstop: Guyed Yellow-Pine Towers on the Ground and Hooked-Down Netting (Boy Mechanic, 1919)
Spartan

Створено

Spartan

14. листопад 2026NO
7
0
0
0
0

Knock-Down Tennis-Court Backstop: Guyed Yellow-Pine Towers on the Ground and Hooked-Down Netting (Boy Mechanic, 1919)

Edward R. Smith's take-down tennis backstop from The Boy Mechanic, Book 3 (1919): two towers about 14 ft high and 50 ft apart, of 4 x 4 and 2 x 4 in yellow pine, stand on brick footings and are guyed with heavy wire; the wire netting hangs from supporting wires on 2 ft crossarms and is hooked to tent stakes at the bottom, so the whole rig comes down between seasons.
Середній
About 2 days

Інструкції

1

Sizes and wire gauges

Завантаження блокнота Jupyter…
2

Read The Boy Mechanic, Book 3

"Instead of setting the supports in the ground, they are set on the ground, and guyed by a system of wire braces."
3

Build the towers and footings

Build two towers about 14 ft high from sound 4 by 4 in and 2 by 4 in yellow-pine timber, to stand 50 ft apart. Make brick foundations, anchored into the ground, for them to stand on, and sink anchors in the ground beyond each end.

Матеріали для цього кроку:

Сосновий пиломатеріалСосновий пиломатеріал6 штук
ЦвяхиЦвяхи1 штука
Болт із півкруглою головкоюБолт із півкруглою головкою4 штук
ЦеглаЦегла20 штук

Необхідні інструменти ({count})

Ручна пилкаРучна пилка
Коловорот із перкоюКоловорот із перкою
МолотокМолоток
ЛопатаЛопата
РулеткаРулетка
4

Guy the towers

Fasten end braces of heavy wire (No. 9) to the top of each tower and guy them to the sunken anchors; they carry the weight of the netting and let a ladder lean safely on the guyed end of a tower.

Матеріали для цього кроку:

Оцинкований сталевий дрітОцинкований сталевий дріт1 штука

Необхідні інструменти ({count})

Дерев'яна драбинаДерев'яна драбина
ПлоскогубціПлоскогубці
5

Rig the supporting wires and hang the netting

Run the supporting wires (No. 20 gauge, as printed) between the towers on crossarms of 1 by 1 in wood, 2 ft long, which stop side motion at the top; wire them to the netting and draw them up so it is fairly taut. Add more supporting wires with vertical leaders to the netting to draw its whole length taut. Let the netting run under the towers, held there by wires, nearly to the end guys.

Матеріали для цього кроку:

Хвойний брусок (рейка)Хвойний брусок (рейка)2 штук
Оцинкований сталевий дрітОцинкований сталевий дріт1 штука
Оцинкована дротяна сіткаОцинкована дротяна сітка1 штука

Необхідні інструменти ({count})

Дерев'яна драбинаДерев'яна драбина
ПлоскогубціПлоскогубці
Ручна пилкаРучна пилка
6

Hook down the bottom and mark the guys

Hold the lower edge of the netting down with hooks pinned to the ground by tent stakes, so it can be unhooked to mow. Tie a white flag to each guy wire about 6 ft from the ground so players see it.

Матеріали для цього кроку:

Залізний дрітЗалізний дріт1 штука
Наметовий кілочокНаметовий кілочок12 штук
ПрапорПрапор2 штук

Необхідні інструменти ({count})

МолотокМолоток
ПлоскогубціПлоскогубці
7

Season and troubleshooting

Backstop troubleshooting.

Flow

Loading...
8

History and honest limits

From "A Knock-Down Tennis-Court Backstop" by Edward R. Smith, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, p. 189). He gives no netting height or mesh, no tower framing details and no anchor type, and No. 20 gauge for the supporting cables is as printed. The tools and metric figures are ours.

Матеріали

10

Необхідні інструменти

7

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...