Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Tape Measure: Curved Steel Blade, Spring and Case
The blade of a tape measure is a thin metal ribbon with a curved, concavo-convex cross-section when it is out of the case, which keeps it stiff, but it lies flat as it winds into a coil inside. The ribbon is painted, printed with its graduations and then given a polymer coat against wear, applied by a roller and cured in an oven. An internal coil spring winds the blade back onto its reel. The end hook is riveted through oval holes so it can slide by its own thickness, giving the same reading whether you hook it on or push it against something. Cases have been moulded in ABS since 1963.
Просунутий
Continuous (industrial)
Інструкції
1
1
Paint and print
Paint and print
Paint the steel ribbon and print the length graduations on it.
Матеріали для цього кроку:
Сталева стрічка для рулеток1 кгНеобхідні інструменти ({count})
Лінія друку й покриття стрічки рулеток2
2
Coat and cure
Coat and cure
Pass the ribbon over a coating roller and through an oven to cure a polymer coat against wear.
Необхідні інструменти ({count})
Лінія друку й покриття стрічки рулеток3
3
Fit the hook
Fit the hook
Rivet the end hook through oval holes so it slides by its own thickness.
Матеріали для цього кроку:
Кінцевий гачок рулетки1 штука
Сталеві заклепки2 штук4
4
Mould the case
Mould the case
Mould the case in ABS.
Матеріали для цього кроку:
Гранули ABS0.1 кгНеобхідні інструменти ({count})
Ливарна машина5
5
Assemble
Assemble
Wind the blade onto its reel with the coil spring that retracts it, set it in the case and close the case.
Матеріали для цього кроку:
Зворотна пружина рулетки1 штукаМатеріали
5- Заповнювач
- 1 штукаЗаповнювач
- 2 штукЗаповнювач
- 0.1 кгЗаповнювач
- 1 штукаЗаповнювач
Необхідні інструменти
2- Заповнювач
- Заповнювач
За цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

