Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Teaspoon Forged from a Silver Bar (Payne 1914)
English
Arthur F. Payne · Public domain (1914)
Forge

Створено

Forge

27. жовтень 2026NO
24
0
0
0
0

Teaspoon Forged from a Silver Bar (Payne 1914)

A 6-inch silver teaspoon forged out of a small bar of silver, the way a blacksmith forges iron. Arthur Payne called it the hardest of his five spoon methods, but the cheapest, because almost no silver is wasted. Source: A. F. Payne, Art Metalwork with Inexpensive Equipment (1914), pp. 184–186; annealing from his chapter XI. Cutting the bar from sheet is ours. Picture: Payne's Fig. 158, teaspoons forged this way.
Просунутий
1 day

Інструкції

1

Cut the silver bar

For a teaspoon 6 in long you need a piece of sterling silver 4 in long, ½ in wide and ⅛ in thick. Mark it out and saw it from sheet of that thickness (cutting from sheet is ours).

Матеріали для цього кроку:

Лист зі стерлінгового сріблаЛист зі стерлінгового срібла1 piece 4 × ½ × ⅛ in

Необхідні інструменти ({count})

РисувалкаРисувалка
Ювелірний лобзикЮвелірний лобзик
2

Forge out the bowl

Heat the bar until it is almost red-hot, hold it in tongs and forge the bowl out on the anvil. Silver forges more easily when it is nearly red, but never hammer it while it is red-hot: it will crack.

Необхідні інструменти ({count})

Пальник БунзенаПальник Бунзена
ЩипціЩипці
КовадлоКовадло
МолотокМолоток
3

Work bowl, then shank and handle

Hammer the bowl until it is hard, then the shank and handle, so the whole spoon is hard before you anneal it again. That saves time.

Необхідні інструменти ({count})

КовадлоКовадло
МолотокМолоток
4

Anneal and repeat

To soften it, heat it to a dull red and plunge it into water, or let it cool. Then go on forging until the spoon is roughly to shape.

Матеріали для цього кроку:

ВодаВода1 as required

Необхідні інструменти ({count})

Пальник БунзенаПальник Бунзена
ЩипціЩипці
Скляна посудинаСкляна посудина
5

Trim with shears and file

Trim the outline with the shears and file the edges smooth.

Необхідні інструменти ({count})

Ножиці по металу посиленіНожиці по металу посилені
Напилки (ручний напилок)Напилки (ручний напилок)
6

Polish out the file marks

Rub out all the scratches and file marks with emery cloth.

Необхідні інструменти ({count})

Шкурка на тканинній основі (шмергельне полотно)Шкурка на тканинній основі (шмергельне полотно)
7

Anneal to even the fire scale

Anneal the spoon thoroughly once more. Heated silver grows a thin white skin, the fire scale, and this brings it back over the spots where filing and polishing took it off, so the colour is even.

Матеріали для цього кроку:

ВодаВода1 as required

Необхідні інструменти ({count})

Пальник БунзенаПальник Бунзена
ЩипціЩипці
Скляна посудинаСкляна посудина
8

Planish with smooth hammers

Planish the spoon on smooth tools with smooth, bright hammers. This makes it stiff again after the annealing.

Необхідні інструменти ({count})

Рихтувальний молотокРихтувальний молоток
КовадлоКовадло
КілокКілок
9

Final polish with rouge

Polish it lightly with a soft cotton flannel and a little red rouge.

Необхідні інструменти ({count})

Серветка для полірування прикрасСерветка для полірування прикрас
Крокус ювелірнийКрокус ювелірний

Матеріали

2

Необхідні інструменти

14

За цим кресленням виготовляють

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...