Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Tweezers: Bent from a Thin Steel Strip (Cassell's, 1900)
Fine tweezers from a single strip of thin sheet steel, bent double so the spring of the bend holds the tips apart. Cassell's gives them for handling dead insects by the thorax.
Variable: strip 3/8 or 1/2 in wide, 6 or 8 in long.
Source: Cassell's Cyclopaedia of Mechanics (1900), p. 72. Picture: drawn by Youblob from the text.
Початківець
Unknown
Інструкції
1
1
Cut the strip
Cut the strip
Cut a strip of thin sheet steel 3/8 or 1/2 in wide and 6 or 8 in long.
Матеріали для цього кроку:
Сталева стрічка (пружинна сталь, тонка)1 stripНеобхідні інструменти ({count})
Ножиці по металу2
2
Bend it double
Bend it double
Bend the strip double at the middle until the two ends meet. Ease the bend so that its spring holds the ends about 3/4 to 1 in apart when free.
Необхідні інструменти ({count})
Слюсарні лещата
Молоток3
3
Point the ends
Point the ends
File the two ends to a blunt point.
Необхідні інструменти ({count})
Напилок по металуМатеріали
1- Заповнювач
Необхідні інструменти
4- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
За цим кресленням виготовляють
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.
