Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Uncapping Knife: the Bingham Knife (Hasluck, 1905)
Forge

Створено

Forge

4. листопад 2026NO
13
0
0
1
0

Uncapping Knife: the Bingham Knife (Hasluck, 1905)

The Bingham honey knife: a trowel-like blade of good saw steel, sharpened all round from the underside, riveted to a cranked 3/8 in tang so the handle stands about an inch above the comb. Hasluck warns it is a job only for a maker with the means for that kind of work. Source: P. N. Hasluck, Beehives and Bee Keepers' Appliances (1905), p. 155. Picture: the book's Fig. 152.
Просунутий
Unknown

Інструкції

1

Shape the blade

Cut a blade of good saw steel 6 or 7 in long and 2 to 3 in wide to the pattern of Fig. 152, like a mason's trowel.

Матеріали для цього кроку:

Смуга пружинної сталіСмуга пружинної сталі1 6-7 x 2-3 in

Необхідні інструменти ({count})

Слюсарне зубилоСлюсарне зубило
Напилок по металуНапилок по металу
2

Make the tang

Make a tang of 3/8 in iron or steel: point one end to fit the handle and flatten the other so it can be riveted to the blade.

Матеріали для цього кроку:

Круглий пруток з маловуглецевої сталіКруглий пруток з маловуглецевої сталі1 3/8 in

Необхідні інструменти ({count})

ГорноГорно
КовадлоКовадло
МолотокМолоток
Напилок по металуНапилок по металу
3

Rivet and set the tang

Rivet the flattened end to the blade with two rivets countersunk into the underside of the blade and ground flush. Bend the tang so that with the blade flat on a board the handle stands about 1 in above it.

Матеріали для цього кроку:

Залізні заклепкиЗалізні заклепки2 штук

Необхідні інструменти ({count})

Ручний дрильРучний дриль
Набір зенківокНабір зенківок
МолотокМолоток
Точильний кругТочильний круг
4

Handle and edge

Fit the handle on the pointed end of the tang. Sharpen the blade all round like a chisel, from the underside only.

Матеріали для цього кроку:

Невідомий матеріалНевідомий матеріал1 handle, material not given

Необхідні інструменти ({count})

Точильний кругТочильний круг

Матеріали

4

Необхідні інструменти

8

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...