Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Long-Slaked Lime for Stucco, Proved with the Hoe Test (Vitruvius, Book VII)
Vitruvius's rule for stucco lime: slake the best lump lime in water a good while before use, so under-burnt lumps finish slaking in the pit instead of blistering on the wall, then prove it with a hoe: lime that sticks to the iron like glue is fully tempered.
Початківець
A good while of slaking (he gives no time), then minutes to test
Інструкції
1
1
Read Vitruvius
Read Vitruvius
"This will be all right if the best lime, taken in lumps, is slaked a good while before it is to be used."
2
2
Slake the lumps
Slake the lumps
Put the best lump lime in the mortar bed and slake it in water (ours: cover it and keep it covered with water). Leave it a good while: any lump not burnt long enough in the kiln throws off its heat in the long slaking and comes to the same consistency.
Матеріали для цього кроку:
Негашене вапно1 штука
Вода1 штукаНеобхідні інструменти ({count})
Ящик для розчину
Лопата
Відро3
3
Hoe test
Hoe test
Chop into the slaked lime with a hoe as if hewing wood. Sticks in bits: not yet tempered, wait. Iron comes out dry and clean: the lime is weak and thirsty. Sticks to the tool like glue: rich and fully tempered, ready for stucco.
Необхідні інструменти ({count})
Сапа4
4
Troubleshooting
Troubleshooting
Stucco lime troubleshooting.
Flow
Loading...
5
5
History and honest limits
History and honest limits
From Vitruvius, **The Ten Books on Architecture**, Book VII ch. II, tr. M. H. Morgan (1914), pp. 204-205 (checked on the archive.org scan vitruviustenbook00vitruoft). He gives no slaking time and no water amount; keeping the lime under water and the safety notes are ours.
За цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.


