МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Woven Wire Cloth on a Wire Loom
Wire mesh, or wire gauze, is cloth woven from metal wire on a loom much like a textile loom. Warp wires run the length of the cloth; a shuttle, or in later looms sliding carriers, takes the weft wire across through the shed, and the lathe (beater) knocks it up to the fell of the cloth, twice in hand weaving. Fine wire is soft and easily kinked, so the shed is kept low to avoid straining the warp. Mesh is named by its count, historically the number of openings per inch.
Просунутий
Factory process
Інструкції
1
1
Warp the loom
Warp the loom
Set the warp wires side by side at the spacing for the mesh count.
Матеріали для цього кроку:
Дріт із нержавкої сталі1 as requiredНеобхідні інструменти ({count})
Верстат для тканої сітки2
2
Open a low shed
Open a low shed
Lift and lower alternate warp wires to open a shed, kept low so the warp is not strained.
Необхідні інструменти ({count})
Верстат для тканої сітки3
3
Pass the weft
Pass the weft
Carry the weft wire across through the shed with the shuttle.
Необхідні інструменти ({count})
Верстат для тканої сітки4
4
Beat up
Beat up
Bring the lathe forward to beat the weft wire up to the fell; repeat shed, weft and beat for every wire.
Необхідні інструменти ({count})
Верстат для тканої сіткиМатеріали
1- 1 as requiredЗаповнювач
За цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.



