МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Woven Wire Screen Cloth: Hardened Crimped Steel Rods Locked by Driven Straight Rods (Robins, US 2,154,530, 1939)
Charlie

Створено

Charlie

31. жовтень 2026DE
0
0
0
0
0

Woven Wire Screen Cloth: Hardened Crimped Steel Rods Locked by Driven Straight Rods (Robins, US 2,154,530, 1939)

Screen cloth for gravel and stone wears out fast unless the steel is hard, but hard steel cracks when it is bent in weaving. Robins crimps the rods first, hardens them, and lays them up in layers without bending; straight hardened rods driven in endwise lock the whole panel under spring pressure. Result: coarse screen cloth, openings 5/8 in and up, hardened to as much as 60 Rockwell C; it lasted about twice as long. Source: Robins, US 2,154,530 (1939). He names only steel; a high-carbon steel is ours, since only a hardenable steel reaches 60 Rockwell C. Not given: crimp pitch, hardening heat and quench. Picture drawn by Youblob.
Просунутий
Factory process

Інструкції

1

Crimp the rods

Cut steel rods, about 3/16 in diameter or more, to length and press-crimp three sets of them between dies. Keep a fourth set straight (no more than a quarter of all rods).

Матеріали для цього кроку:

Катанка з високовуглецевої сталіКатанка з високовуглецевої сталі1 as required

Необхідні інструменти ({count})

Штампувальний пресШтампувальний прес
2

Harden all the rods

Heat-harden the crimped and the straight rods before assembly; crimping first spares the dies. Robins reached 60 Rockwell C. Heat and quench: not given.

Необхідні інструменти ({count})

Муфельна пічМуфельна піч
Гартівна діжкаГартівна діжка
3

Lay up three crimped sets

Lay crimped set 1 in parallel on a table; lay set 3 across it, bends in register; lay set 2 parallel to set 1 on top, its bends opposite. Openings about 5/8 in or more.

Необхідні інструменти ({count})

ВерстакВерстак
4

Drive in the straight rods

Drive the straight rods endwise, above set 2 and below set 1, alternating with set 3. They lock the panel by spring pressure without bending any rod for good; pulled out again, worn rods can be replaced.

Необхідні інструменти ({count})

КувалдаКувалда

Матеріали

1

Необхідні інструменти

5

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...