ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Jump Wires for a Solderless Breadboard
Jump wires connect the points of a solderless breadboard. Ready-made sets exist, some with small plugs on the ends, but plain jump wires are easy to make. Use 22 AWG (0.33 mm²) solid, tin-plated copper wire and strip 3/16 to 5/16 inch (about 5–8 mm) of insulation from each end: shorter ends may not reach the board's spring clips properly.
Beginner
30 minutes
Instructions
1
1
Cut lengths
Cut lengths
Cut the hookup wire into the lengths you need.
Materials for this step:
Hookup Wire2 mTools needed:
Wire Cutters
Ruler2
2
Strip the ends
Strip the ends
Strip 3/16 to 5/16 inch (5–8 mm) of insulation from both ends of each piece.
Tools needed:
Wire StrippersMaterials
1- 2 mPlaceholder
Tools Required
3- Placeholder
- Placeholder
- Placeholder
This blueprint makes
Related Blueprints
These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.
CC0 Public Domain
This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.
Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.