ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Doneness Is a Temperature, Not a Time — and Carryover Is Real
TheChef

Created by

TheChef

24. September 2026DK
0
0
0
0
0

Doneness Is a Temperature, Not a Time — and Carryover Is Real

"Twenty minutes per kilo" assumes your oven, your pan, your starting temperature and your piece of meat. A thermometer assumes nothing, and it is the difference between cooking and hoping. What actually matters is what happens to proteins at particular temperatures, and those numbers are the same everywhere: around 50 degrees for rare, 60 for medium, 70 for well done, 74 for poultry to be safe. They do not depend on the recipe. And the meat does not stop cooking when it leaves the heat. The outside is far hotter than the middle, and that heat keeps travelling inward — CARRYOVER — which for a large roast can be 5 to 8 degrees. Ignore it and the thermometer was no help at all.
Intermediate
3 hours

Instructions

1

Measure the centre, and measure it properly

Push the probe into the THICKEST part and stop at the centre. Too shallow reads the hot outside and tells you it is done when it is not; too deep comes out the other side into the pan and reads the pan. Avoid bone and avoid fat. Bone conducts heat differently and will read high; a pocket of fat reads differently again. Probe from the side of a roast rather than straight down, which makes it easier to find the true middle. Take more than one reading, in more than one place. The repeat-and-look-at-the-spread rung applies directly: a single probe reading is a single measurement, and the coldest spot is the one that decides whether the thing is safe.

Materials for this step:

ChickenChicken1 piece

Tools needed:

Instant-Read ThermometerInstant-Read Thermometer
Cooking ThermometerCooking Thermometer
Kitchen TongsKitchen Tongs
2

The temperatures, and pulling early for carryover

Loading Jupyter Notebook...

Materials for this step:

Lean BeefLean Beef1 piece
ChickenChicken1 piece

Tools needed:

Instant-Read ThermometerInstant-Read Thermometer
Desktop ComputerDesktop Computer
NotebookNotebook
3

Time and temperature together, not temperature alone

Safety is a combination of how hot and for how long. Chicken at 74 degrees is safe instantly; the same chicken held at 60 degrees for a few minutes reaches the same reduction in bacteria — which is why low-temperature cooking can be both safe and far juicier. Texture follows the same logic in the other direction. A tough cut held at 80 degrees for hours converts its collagen to gelatin and becomes tender; the same cut taken quickly to 80 degrees is simply dry. Time at temperature is doing the work, not the peak. So braising is not a slow version of roasting. It is a different mechanism with a different target, and the thermometer question changes from "has it reached X" to "has it been at X long enough".

Materials for this step:

Lean BeefLean Beef1 piece
WaterWater1 piece

Tools needed:

Stock PotStock Pot
Cooking ThermometerCooking Thermometer
NotebookNotebook
4

Check your thermometer, because it can be wrong

Put the probe in a glass of ice and water, stirred, and it should read 0 degrees. Put it in boiling water and it should read 100, less about 1 degree for every 300 metres of altitude. That is a two-point calibration using references nature supplies free, and it is the same idea as the Celsius rung. Many thermometers have an adjustment; those that do not can still have their error written on a label and subtracted. Do it when the thermometer is new, after it has been dropped, and once a year otherwise. A thermometer reading 4 degrees low will have you serving undercooked chicken with complete confidence, and nothing else in the kitchen will tell you.

Materials for this step:

WaterWater1 piece

Tools needed:

Instant-Read ThermometerInstant-Read Thermometer
Cooking ThermometerCooking Thermometer
Large Mixing Bowl (Glass)Large Mixing Bowl (Glass)

Materials

3

Tools Required

7

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...