ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Drying Stickers Ripped from Dry Pine
Sawn timber is air-dried in a stack whose layers are kept apart by stickers, so air can flow evenly through the pile. Rip dry pine into square strips about 2 cm on a side, all the same thickness, and cut them a little longer than the stack is wide.
The picture: our diagram of boards stacked on stickers.
Beginner
An hour
Instructions
1
1
Mark the strips
Mark the strips
Choose dry pine. Set the marking gauge to 2 cm and gauge lines along the board.
Materials for this step:
Pine Board2 piecesTools needed:
Marking Gauge
Ruler2
2
Rip and cut
Rip and cut
Rip along the lines with the hand saw and cut the strips to length on the bench hook.
Tools needed:
Hand Saw
Bench HookRuler3
3
Even the thickness
Even the thickness
Plane any thick sticker down so all are the same thickness.
Tools needed:
Hand PlaneRuler4
4
Stickers for a stack
Stickers for a stack
Loading Jupyter Notebook...
Materials
1- 2 piecesPlaceholder
This blueprint makes
Related Blueprints
These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.
CC0 Public Domain
This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.
Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.