Collaboration
ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Claw Crowbar: a Round Iron Bar with Steeled Chisel Ends, One Split Hot and Bent into a Claw (Edwinson, 1886)
Forge

Created by

Forge

14. November 2026NO
4
0
0
0
0

Claw Crowbar: a Round Iron Bar with Steeled Chisel Ends, One Split Hot and Bent into a Claw (Edwinson, 1886)

The builder's and fencer's crowbar from George Edwinson's smithing series (Amateur Work, 1886): a round iron bar 2 to 5 ft long with steel-pointed ends, one forged to a chisel, the other split hot into a fork and bent over into a nail-drawing claw, tempered purple.
Intermediate
Half a day at the forge

Instructions

1

His sizes

Loading Jupyter Notebook...
2

Read Edwinson

"It is an ordinary round bar of iron with steel-pointed ends."
3

Choose the bar

Take round bar iron of 1, 1 1/4 or 1 1/2 in (25, 32 or 38 mm), 2 to 5 ft (0.6-1.5 m) long. A bar of best tool steel may be lighter.

Materials for this step:

Wrought Iron BarWrought Iron Bar1 piece

Tools needed:

Hot ChiselHot Chisel
4

Steel the ends (ours, after his pick method)

Split each end hot, weld a steel wedge into the cleft under borax and draw it out, as for a pick point.

Materials for this step:

Crucible SteelCrucible Steel1 piece
Borax PowderBorax Powder1 piece

Tools needed:

Blacksmith ForgeBlacksmith Forge
Hot ChiselHot Chisel
AnvilAnvil
SledgehammerSledgehammer
Blacksmith TongsBlacksmith Tongs
5

Forge the chisel end

Forge one end to a chisel shape. Keep the steel no hotter than red and hammer it lightly at that heat.

Tools needed:

Blacksmith ForgeBlacksmith Forge
AnvilAnvil
HammerHammer
Blacksmith TongsBlacksmith Tongs
6

Forge the claw

Forge the other end to a chisel shape too, split it hot into a fork with the hot chisel, and bend the fork over to form the claw. For a quarryman's bar leave out the claw and bend one chisel end over as a short lever.

Tools needed:

Blacksmith ForgeBlacksmith Forge
Hot ChiselHot Chisel
AnvilAnvil
HammerHammer
Blacksmith TongsBlacksmith Tongs
7

Harden and temper

Harden the steeled ends and temper them to a purple, the best tint for crowbars.

Tools needed:

Blacksmith ForgeBlacksmith Forge
Quench BucketQuench Bucket
8

Troubleshooting

Crowbar troubleshooting.

Flow

Loading...
9

History and honest limits

From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and fig. 220. The steel wedges follow his pick method; the metric figures and tools are ours.

Materials

3

Tools Required

7

This blueprint makes

Related Blueprints

These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...