Collaboration
ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Coppice Wood for Poles, Billets and Faggots (Evelyn's Sylva, 1706)
Karen

Created by

Karen

14. November 2026SE
0
0
0
0
0

Coppice Wood for Poles, Billets and Faggots (Evelyn's Sylva, 1706)

John Evelyn's coppice husbandry: hazel, ash, chestnut and willow planted close and cut back to the stool every 8 to 20 years, so each fell gives poles, statute billets and faggots, while the best saplings are left to grow on as timber.
Intermediate
Rotations of 8 to 20 years; a winter per fell

Instructions

1

Rotation and measures

Loading Jupyter Notebook...
2

Read Sylva

"Sylva caedua is (as Varro defines it) as well copp'ce to cut for fuel as for use of timber."
3

Lay out and plant

Lay the coppice out in parts that are cut in turn, with 18-20 ft rides of grass between them for carts, and fence it. Plant hazel or birch with ash, chestnut, sallow and sycamore mixed in (at least one in four), no closer than 5 ft; on wet ground drain it and put willow, sallow and alder low down. Or bury sets of sallow, willow or alder, a billet long with both ends sloped. Weed for two years and keep cattle out.

Materials for this step:

Hardwood SaplingHardwood Sapling1 piece

Tools needed:

SpadeSpade
HoeHoe
4

Choose the rotation

Cut after 8 or 9 years on very good ground, otherwise 12 to 15; 20 years is better. With a 17-year growth, a 17-acre coppice gives one acre to fell every year for ever. Shallow ground 10-12 years, deeper 14.
5

Fell the underwood

Fell from January to mid-March or April, or mid-September to near the end of November, starting from one side so carts can enter. Cut no higher than half a foot, the closer the better, slanting, smooth and sloping to the south. Of a bunch of shoots keep the fairest sapling. Leave about twelve good young oaks (or ash, elm, beech) per acre as standards, best on the edges. Keep enough poles round the bounds for the fence.

Tools needed:

AxeAxe
BillhookBillhook
6

Make up the wood

Sort out the straight poles. Cut billets 3 ft long and 7.5 in round, and bind the brush into round faggots a full yard long and 2 ft round. Stack cordwood 4 ft high, 4 ft broad and 8 ft long (128 cubic feet). Clear everything by Midsummer.

Materials for this step:

Jute TwineJute Twine1 piece

Tools needed:

AxeAxe
BillhookBillhook
Hand SawHand Saw
7

Close it up

Rake out spray and chips, grub out rotten stubs, fill thin places with new plants, and shut the coppice to cattle: four years if it was cut at 14 years or under, longer if older.

Materials for this step:

Hardwood SaplingHardwood Sapling1 piece

Tools needed:

Iron RakeIron Rake
SpadeSpade
8

Troubleshooting

Coppice troubleshooting.

Flow

Loading...
9

History and honest limits

From John Evelyn, **Sylva** (text of the 1706 edition, London reprint 1908), Book III, Chap. I 'Of Copp'ces' (checked on the archive.org scan sylvaordiscourse02evelrich, pp. 1-7). The statutes he cites are 17th-century English law, given as history; metric figures are ours.

Materials

2

Tools Required

6
  • Placeholder
  • Placeholder
  • Placeholder
  • Placeholder
  • Placeholder
  • Placeholder

Related Blueprints

These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...