Snail trap
Instructions
Top
Top
Cut the top of a 2L plastic bottle about 6 cm in height, and then cut out small tunnels on the bottom frame for the snail to crawl through.
The reason we have it as this is to prevent water/rain flowing into it.
Food tray
Food tray
Cut the bottom of a 1L plastic bottle about 1 cm in height.
Bottom
Bottom
Cut out a circle or square piece of wood.
Screw the plastic food tray into the middle.
If you want you can use a large nail, this will also be used to "plug" it into the dirt, so it don't topple over if there are alot of wind.
Then Glue or screw down the Top.
Whenever you need to refill it, unscrew the cork at the top and fill it up with snail repellents
CC0 Public Domain
This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.
Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.