ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Gravity: Measuring the Sugar Before and After Tells You Everything
Alchometer

Created by

Alchometer

24. September 2026GB
23
0
0
0
0

Gravity: Measuring the Sugar Before and After Tells You Everything

Sugar dissolved in water makes it denser. Yeast converts that sugar into alcohol, which is LESS dense than water. So measuring the density before and after fermentation tells you how much sugar was consumed — and therefore how much alcohol was made. That is what a hydrometer does, and it turns brewing from guesswork into measurement. Two readings and a subtraction give the strength, and the same two readings tell you whether fermentation finished or stalled. Which makes it the one instrument that is genuinely not optional. A brewer without gravity readings does not know how strong the drink is, whether it is safe to bottle, or what went wrong when something does.
Beginner
2 hours

Instructions

1

Take the reading properly

Float the hydrometer in a tall sample jar, not in the fermenter. Spin it gently as you let go so the bubbles clinging to it release — bubbles lift it and give a reading that is too low. Read at the bottom of the meniscus, at eye level, exactly as with any volumetric glassware. And take the sample AT the calibration temperature or correct for it: most hydrometers are calibrated at 20 °C, and a hot sample reads low because the liquid has expanded. Never pour the sample back. It has been exposed, it has been in an un-sanitised jar, and returning it risks the whole batch for a few millilitres. Taste it instead — that sample is also your best early warning of an off-flavour.

Materials for this step:

WaterWater1 liter

Tools needed:

Brewing Hydrometer & Test JarBrewing Hydrometer & Test Jar
Brewing Thermometer & Hydrometer SetBrewing Thermometer & Hydrometer Set
Instant-Read ThermometerInstant-Read Thermometer
2

From two readings to alcohol

Loading Jupyter Notebook...

Materials for this step:

WaterWater1 liter

Tools needed:

Brewing Hydrometer & Test JarBrewing Hydrometer & Test Jar
Desktop ComputerDesktop Computer
CalculatorCalculator
3

A refractometer is fast and lies after fermentation starts

A refractometer needs two drops instead of a full sample jar, works on hot wort, and gives a reading in seconds. For pre-fermentation gravity it is far more convenient than a hydrometer. But alcohol bends light differently from sugar, so once fermentation has started the reading is systematically wrong. Correction formulae exist and they need the original gravity as an input, which means a refractometer alone cannot give a final gravity. That is a textbook systematic error: repeatable, in one direction, invisible from the reading itself. Use the refractometer for the start and the hydrometer for the end, which is each instrument used where it does not lie.

Tools needed:

Brix Refractometer (0-32%)Brix Refractometer (0-32%)
Brewing Hydrometer & Test JarBrewing Hydrometer & Test Jar
4

Write every reading down with its date

A single gravity reading tells you very little. Two readings three days apart tell you whether fermentation is finished, and a series tells you how fast it went and whether it slowed unexpectedly. So log OG on brew day, then a reading every few days once the visible activity slows. The criterion for done is two or three identical readings over several days — the dry-to-constant-mass loop from the chemistry batch, applied to a fermenter. Record the temperature with every reading, and the yeast used. Those three columns together turn a brewery into something that improves rather than one that produces a different drink each time.

Tools needed:

Brewing Hydrometer & Test JarBrewing Hydrometer & Test Jar
Instant-Read ThermometerInstant-Read Thermometer

Materials

1
  • 2 liters
    Placeholder

Tools Required

6

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...