Collaboration
ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Totem Pole of the Haida, Tlingit and Tsimshian: Cedar Log Adzed, Relief-Carved with Crests, Painted and Raised on Guys (Niblack, 1890)
Woody

Created by

Woody

15. November 2026NO
6
0
0
0
0

Totem Pole of the Haida, Tlingit and Tsimshian: Cedar Log Adzed, Relief-Carved with Crests, Painted and Raised on Guys (Niblack, 1890)

How the Haida, Tlingit and Tsimshian made the carved crest columns we call totem poles, as Albert Niblack recorded them around 1888: a cedar log got out of the forest and hauled up on skids, adzed smooth, relief-carved with the owner's clan crest at the top and his wife's crest and family legends below, painted with ochre or lignite ground with salmon eggs, and raised with poles, props and rope guys into a deep hole at a potlatch.
Advanced
Months to years

Instructions

1

Read Niblack

"These are the very tall ones erected in front of the houses, and are generally surmounted by the clan-totem of the chief occupant."
2

Plan the crests

The column tells whose it is: the owner's clan crest at the top (among the Tlingit often the phratry crest, with clan crests below), his wife's crest, which is also his children's, below it, or a family legend tied to his crest. The figures are the owner's own; carve your own family's story, not a copy of someone else's pole (ours).
3

Get out the log

Fell a large, straight cedar (ours: western red cedar). Split off what is not wanted with wedges and get the timber out in the rough in the forest, then tow or haul it to the site and lift it onto skids.

Materials for this step:

Red Cedar LogRed Cedar Log1 piece

Tools needed:

AxeAxe
Wooden WedgesWooden Wedges
Wooden MalletWooden Mallet
RopeRope
Wooden PoleWooden Pole
4

Smooth the log

On the skids, smooth-finish the log with the adze. The old blades were green jade-like stone; in Niblack's day the favourite was the end of a broad flat file ground sharp and hafted.

Tools needed:

AdzeAdze
5

Carve in relief

Carve the crests in relief: rough down the surface with the chisel and adze, then smooth by scraping with sharp-edged shells or stones, or rub with dogfish skin for a finished surface. The carving was done by the owner if he was expert, or by carvers he hired.

Materials for this step:

Dogfish SkinDogfish Skin1 piece

Tools needed:

AdzeAdze
Chisel Set - WoodChisel Set - Wood
Wooden MalletWooden Mallet
6

Grind the paint and paint

Grind red or brown ochre, charcoal or lignite in a stone mortar. For a lasting black on wood, grind lignite dry with salmon eggs first chewed with cedar bark: it gives the paint body and makes it stick. Paint the figures with hair or fibre brushes (in older times columns were simply daubed with ochre).

Materials for this step:

Raw OchreRaw Ochre1 piece
CharcoalCharcoal1 piece
LigniteLignite1 piece
Salmon RoeSalmon Roe1 piece
Red Cedar Inner BarkRed Cedar Inner Bark1 piece

Tools needed:

Stone Mortar and PestleStone Mortar and Pestle
Fine BrushesFine Brushes
7

Raise the column

Dig a deep hole in front of the house (ours: about a fifth of the pole's length, and well clear of the house front unless you are making a Haida doorway pole). Raise the column with poles, props and rope guys, many people pulling together, set its foot in the hole and pack it firm.

Tools needed:

ShovelShovel
RopeRope
Wooden PoleWooden Pole
8

Troubleshooting

Totem pole troubleshooting.

Flow

Loading...
9

History and honest limits

From Albert P. Niblack, *The Coast Indians of Southern Alaska and Northern British Columbia*, **Report of the U.S. National Museum for 1888** (1890), pp. 279-282, 307-309, 319-320, 324 and Plate II (checked on the archive.org scan coastindiansofso00nibl). Among the Haida the column usually stood against the house with the doorway cut through it about three feet up; others stood a few feet in front. Raising was a potlatch: feasting, dancing and gifts, the work itself a small part of the time. Only the wealthy could afford one. Niblack gives no sizes or carving order: species, sizes, hole depth and the order of work are ours.

Materials

7

Tools Required

10

This blueprint makes

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...