Parmelee Fire Sprinkler
Early factory fire protection was a perforated pipe running along the ceiling with a valve at the end of the building. When a fire broke out, somebody had to notice it, reach the valve, and open it — soaking every floor of the mill in the process.
Parmelee's sprinkler decides for itself, locally. Each head is held shut by a joint of low-melting-point alloy. Heat from a fire directly beneath melts that joint, the head opens, and water falls on that spot alone. No detector, no wiring, no person: the fire operates its own extinguisher.
The elegance is that the sensor, the decision and the valve are one component, and the failure mode is chosen well — a head that fails tends to fail by opening. US Patent 154,076, "Improvement in fire-extinguishers", granted to Henry S. Parmelee of New Haven on 11 August 1874.
Hazardous content
This blueprint contains hazardous procedures. Log in and enable hazardous content in your account settings to view the step-by-step instructions.
Related Blueprints
These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.
CC0 Public Domain
This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.
Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.