ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
The Bootjack Burglar Alarm: A Spring Treadle That Grips the Heel or Bangs the Door
Martin

Created by

Martin

30. September 2026NO
11
0
0
0
0

The Bootjack Burglar Alarm: A Spring Treadle That Grips the Heel or Bangs the Door

A traveller carries a bootjack for the evening and, in a strange inn, wants some warning if the door opens in the night. F. C. Goffin of Newark, New Jersey, received US 19,844, dated 6 April 1858, for an implement "Which Serves the Purpose of a Boot-Jack and Burglar-Alarm": two jaws pivoted on a bed plate and a spring treadle whose wedge-shaped pendant forces the jaws together round the heel; set on the floor against a door, the slide's other shoulder holds the treadle down, and "If the door A′ be slightly opened the slide F, will be forced inward, the projection (e) thrown off the bar (g) and the spring D, will force the treadle C upward against the door sounding an alarm". This rung works out the jaws' grip with a work check, then builds the jack from plywood and hardwood with a sprung treadle and tests both jobs.
Advanced
About 5 hours

Instructions

1

Treadle, wedge and grip

Loading Jupyter Notebook...
2

A jack worked by the hand

The embedded blueprint holds the boot with a shaft worked by the hand. Goffin's jaws are closed by the foot on the treadle.
3

Read US 19,844

"My invention consists in the employment or use of two adjustable or movable jaws and a spring treadle attached to a bed or plate and used in connection with a catch, the parts being so arranged as hereinafter described that the treadle is made to perform the double function of operating the jaws when pressed down by the foot and the implement used as a boot jack, and of sounding an alarm when the implement is used as a burglar alarm and placed in proper position against a door." "This implement is quite portable may be packed in a carpet bag or small trunk without inconvenience and will be very useful in traveling."
4

Build the jack and try both jobs

**Bed.** Cut a bed 35 × 12 cm from plywood. Hinge a prop under its front end with a butt hinge so it can stand the jack up or fold flat. **Jaws.** Saw two curved jaws 12 × 3 cm from hardwood board and bolt each to the bed's back end near its inner end, so the outer ends can close round a heel. **Treadle.** Cut a treadle the size of the bed and hinge its front end to the bed. Glue a hardwood wedge with a 25° half-angle under its back end so it drops between the jaws' inner ends. Seat a compression spring between bed and treadle to lift it. **Catch.** Screw a sliding strip under the bed with a shoulder at each end: at one end it holds the treadle part way down for the jack; at the other it holds it right down, and a door pushing the strip's outer end frees it. **Test.** Take a rubber boot off with it and note how firmly the jaws grip. Then set it on the floor against a door, catch the treadle down, and open the door slowly: note how far it opens before the treadle snaps up against it.

Materials for this step:

Plywood SheetPlywood Sheet1 piece
Hardwood BoardHardwood Board1 piece
Hardwood BlockHardwood Block1 piece
Butt HingeButt Hinge2 pieces
Compression Spring AssortmentCompression Spring Assortment1 piece
Hex Bolt AssortmentHex Bolt Assortment1 piece
Hex NutHex Nut2 pieces
Flat WasherFlat Washer4 pieces
Wood ScrewsWood Screws10 pieces
Wood GlueWood Glue5 ml

Tools needed:

Hand SawHand Saw
Coping SawCoping Saw
Cordless DrillCordless Drill
Drill Bit SetDrill Bit Set
ProtractorProtractor
Screwdriver SetScrewdriver Set
Adjustable WrenchAdjustable Wrench
RulerRuler
Rubber BootsRubber Boots
Boot JackBoot Jack
5

A jack that will not grip or an alarm that will not trip

Bootjack burglar alarm troubleshooting.

Flow

Loading...
6

History and honest limits

**F. C. Goffin** of Newark, Essex County, New Jersey, received US 19,844, dated 6 April 1858. His bed could be solid or cast in skeleton form, the pendant was taper or wedge shaped, a prop at the front could be turned down to raise the jack or up to lie flat, and a spiral spring worked the treadle. His claim is the jaws, treadle, wedge and slide arranged for both jobs. **Honest limits.** Plywood, hardwood, butt hinges and a compression spring stand in for his cast bed, jaws and spiral spring, and the catch is a simplified sliding strip. The notebook ignores friction; its forces and lengths are examples. Your grip and door tests are the result.

Materials

10

Tools Required

10

Related Blueprints

These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...