ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
The Rooftop Fire Escape: A Railed Bridge to the House Next Door
Martin

Created by

Martin

27. September 2026NO
12
0
0
0
0

The Rooftop Fire Escape: A Railed Bridge to the House Next Door

In a row of tall city houses a fire on the stairs traps the people above it. The way out is up, through the roof hatch — and then across to the next house. Anna Connelly of Philadelphia filed US 368,816 on 13 May 1887; it is dated 23 August 1887. Her fire escape is "a bridge surrounded by a railing and having openings in the ends of the floor thereof", placed on the roofs of adjoining buildings so people can pass safely from one roof to the other, with alarms worked from the bridge to rouse the neighbours if their scuttle is shut. This rung works out how long an escape takes and what the bridge must carry, and builds a model between two boxes.
Beginner
About 2 hours

Instructions

1

Crossing time and bridge strength

Loading Jupyter Notebook...
2

The way up to the roof

Every roof escape starts with a ladder to the hatch. The embedded blueprint makes one.
3

Read US 368,816

Connelly's invention "consists of a bridge surrounded by a railing and having openings in the ends of the floor thereof ... the said bridge being adapted to be placed on the roofs of adjoining or adjacent buildings, thereby permitting the ready and safe passage from one roof to the other." It further provides "alarms adapted to be operated from said bridge", whereby "the inmates of either or both of the said buildings may be alarmed". The bridge A has openings B at opposite ends of its floor, with guards C round them continuous with the side rails D. Placed so the openings are over the scuttles or trap doors, people pass up through one and "over the bridge to the opposite scuttle or trap door, being prevented from falling owing to the end guards and side rails". "Should said scuttle or trap-door not be open, the respective bell is rung, whereby the occupants of the house are alarmed or signaled", and they open it from within.
4

Model the escape

Stand two cardboard boxes 25 cm apart as neighbouring houses and cut a square hatch in each lid. Build a bridge from two dowel side rails and card decking, with a hole at each end over the hatches and guard rails round the holes, and glue it down. Load the middle of the bridge with weights until it sags visibly, measure the sag, and try a deeper side rail. Tie a small bell under one end that rings when a string across the far hatch is pulled.

Materials for this step:

Corrugated Cardboard SheetsCorrugated Cardboard Sheets1 piece
Hardwood DowelsHardwood Dowels1 piece
Piezo BuzzerPiezo Buzzer1 piece

Tools needed:

Craft KnifeCraft Knife
Self-Healing Cutting MatSelf-Healing Cutting Mat
Hot Glue GunHot Glue Gun
RulerRuler
WeightWeight
5

A roof escape that fails

Roof escape checks.

Flow

Loading...
6

History and honest limits

**Anna Connelly** of Philadelphia filed US 368,816 on 13 May 1887; it is dated 23 August 1887. She claims a fire-escape bridge connectible with adjacent houses, with floor openings over their scuttles, guards and rails, and alarms operated from the bridge. **Honest limits.** Flow rates, crowd size and timber strength in the notebook are assumptions.

Materials

3

Tools Required

5

Related Blueprints

These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...