ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
The Standing Transplanter: Set Out Plants Without Stooping
Karen

Created by

Karen

28. September 2026SE
0
0
0
0
0

The Standing Transplanter: Set Out Plants Without Stooping

Setting out hundreds of young plants by hand means bending to the ground for every one, and the back pays for it. Edmund W. Packer of Paulsborough, New Jersey, received US 53,662, dated 3 April 1866, for an implement for setting out sweet-potato, cabbage and other plants "not requiring the person using it to stoop". A staff with a wedge-shaped foot carries tong-levers that hold the plant, and a spring-returned ram firms the earth around it. This rung works out the load stooping puts on the lower back, then builds a standing transplanter and sets out a row of seedlings with it.
Beginner
About 3 hours

Instructions

1

Back load, upright against stooped

Loading Jupyter Notebook...
2

Getting the plants ready

The embedded blueprint hardens seedlings and plants them out. Packer's staff sets them out without bending.
3

Read US 53,662

"The object of this invention is to provide a tool or implement with which sweet-potato, cabbage, and other plants can be expeditiously set out or planted in the ground, and with but very little manual labor, the implement embraced by the present improvements not requiring the person using it to stoop, which by the mode hitherto practiced for the setting out of such plants with the hands occasioned much pain in the person's back". The plant is "forced into the ground, and to any desired depth, by simply exerting more or less force upon the staff", after which the ram "is forced down, pressing the earth around and about the plant", and "is drawn back by the action of the spiral spring G".
4

Build a standing transplanter and plant a row

Raise lettuce seedlings in a seedling tray. Take a broom handle as the staff and fix a wedge-shaped hardwood foot to its lower end. Screw two long hardwood strips to its sides as tongs, hinged at the top, so their lower ends pinch a seedling's stem when squeezed together. Beside the staff, fit a sliding dowel with a flat foot as the ram, guided by two screw eyes and pulled back up by a spring. Set out one row with the transplanter and one by hand with the trowel. Time each row, and note how often you had to bend.

Materials for this step:

Hardwood BoardHardwood Board1 piece
Wooden DowelWooden Dowel1 piece
Compression Spring AssortmentCompression Spring Assortment1 piece
Wood ScrewsWood Screws8 pieces
Lettuce Seeds - Mixed GreensLettuce Seeds - Mixed Greens1 piece
Potting Soil MixPotting Soil Mix1 piece

Tools needed:

TransplanterTransplanter
Garden TrowelGarden Trowel
Seedling TraySeedling Tray
Watering CanWatering Can
Hand SawHand Saw
Cordless DrillCordless Drill
StopwatchStopwatch
5

Transplants that wilt, lean or sit too shallow

Transplanting troubleshooting.

Flow

Loading...
6

History and honest limits

**Edmund W. Packer** of Paulsborough, Gloucester County, New Jersey, received US 53,662, dated 3 April 1866. The patent prints no filing date. **Honest limits.** The notebook treats the upper body as one weight at one distance. It is a rough guide to how the back load grows, not a medical figure. The masses and distances are examples. Your timed rows are the measurement.

Materials

6

Tools Required

7

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...