ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Three-Strand Cotton Rope, Laid by Hand
Tex

Created by

Tex

14. October 2026FO
1
0
0
0
0

Three-Strand Cotton Rope, Laid by Hand

Laid rope is three strands twisted together, each twist opposite the one inside it: the yarns one way, the strands the other, the rope the first way again. Each layer tries to untwist and is held by the next. Twist three strands of cotton twine hard, then let them lay themselves into rope. The picture: a laid cotton rope, from the 1911 Encyclopaedia Britannica.
Intermediate
Half a day

Instructions

1

Lay out the strands

Run three equal strands of several twines each from a post to three hooks, half as long again as the rope you want (step 5).

Materials for this step:

Cotton TwineCotton Twine60 m

Tools needed:

Straight Wooden ShaftStraight Wooden Shaft
C-ClampC-Clamp
RulerRuler
ScissorsScissors
2

Twist each strand

Hook one strand into the hand drill and twist it the same way as the twine was plied until it kinks when slackened. Clamp it, and do the other two the same.

Tools needed:

Hand DrillHand Drill
C-ClampC-Clamp
3

Lay the rope

Bring the three strand ends together and let go slowly from the far end: they twist round one another the opposite way. Guide the lay with a hand so it closes evenly.

Tools needed:

C-ClampC-Clamp
4

Whip the ends

Bind each end tightly with a few turns of twine so it cannot unlay, and trim.

Materials for this step:

Cotton TwineCotton Twine1 m

Tools needed:

ScissorsScissors
5

Twine needed

Loading Jupyter Notebook...

Materials

1

Tools Required

5

Related Blueprints

These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...