ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Tweezers: Bent from a Thin Steel Strip (Cassell's, 1900)
Fine tweezers from a single strip of thin sheet steel, bent double so the spring of the bend holds the tips apart. Cassell's gives them for handling dead insects by the thorax.
Variable: strip 3/8 or 1/2 in wide, 6 or 8 in long.
Source: Cassell's Cyclopaedia of Mechanics (1900), p. 72. Picture: drawn by Youblob from the text.
Beginner
Unknown
Instructions
1
1
Cut the strip
Cut the strip
Cut a strip of thin sheet steel 3/8 or 1/2 in wide and 6 or 8 in long.
Materials for this step:
Steel Strip (Spring Steel, Thin)1 stripTools needed:
Tin Snips2
2
Bend it double
Bend it double
Bend the strip double at the middle until the two ends meet. Ease the bend so that its spring holds the ends about 3/4 to 1 in apart when free.
Tools needed:
Bench Vise
Hammer3
3
Point the ends
Point the ends
File the two ends to a blunt point.
Tools needed:
Metal FileMaterials
1- Placeholder
This blueprint makes
CC0 Public Domain
This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.
Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.