ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Metal Oxide Varistor: Zinc Oxide with Bismuth and Nickel Oxides, 1350 °C (Masuyama 1972)
Masuyama, Matsuoka and Nishi found that adding a second oxide to zinc oxide and bismuth oxide changes the varistor a great deal. This is their Example 2 with nickel oxide: 99.0 % zinc oxide, 0.5 % bismuth oxide and 0.5 % nickel oxide by moles, sintered at 1350 °C. The disc measured a C-value of 49 at 1 mA and a nonlinearity exponent n of 8.8.
Source: T. Masuyama, M. Matsuoka and T. Nishi (Matsushita), US 3,663,458 (1972), Example 2. Unknown: how the aluminium is sprayed on and what the silver paint is. The 10 g batch is our arithmetic. Picture: the patent's drawing.
Advanced
1 day
Instructions
1
1
Weigh 99.0 : 0.5 : 0.5 and wet-mill 5 hours
Weigh 99.0 : 0.5 : 0.5 and wet-mill 5 hours
Mix zinc oxide, bismuth oxide and nickel oxide 99.0 : 0.5 : 0.5 by moles. Ours, for 10 g: 9.675 g zinc oxide, 0.28 g bismuth oxide, 0.045 g nickel oxide (our arithmetic). Mill wet for 5 hours, then dry. Unknown: the milling liquid.
Materials for this step:
Zinc Oxide Powder9.675 g
Bismuth Oxide0.28 g
Nickel Monoxide0.045 gTools needed:
Balance Scale
Iron Ball Mill
Drying Oven2
2
Press discs 13 mm by 2.5 mm
Press discs 13 mm by 2.5 mm
Press the powder in a mould into discs 13 mm across and 2.5 mm thick at 340 kg/cm², as in Example 1.
Tools needed:
Hydraulic Press
Disc Pressing Die
Vernier Caliper3
3
Sinter 1 hour at 1350 °C and furnace-cool
Sinter 1 hour at 1350 °C and furnace-cool
Sinter the discs in air at 1350 °C for 1 hour, then let them cool in the furnace to room temperature (about 15-30 °C).
Tools needed:
Muffle Furnace4
4
Lap to 10 mm by 1.5 mm
Lap to 10 mm by 1.5 mm
Lap both faces with 600-mesh silicon carbide. The finished disc is 10 mm across and 1.5 mm thick.
Tools needed:
Silicon Carbide GritVernier Caliper5
5
Spray aluminium electrodes and attach leads
Spray aluminium electrodes and attach leads
Spray a metallised film of aluminium on both faces. Attach a lead wire to each with conductive silver paint. Unknown: the spraying method and the paint.
Materials for this step:
Aluminium Ingot1 as required
Silver Conductive Paint1 as required
Copper Wire2 piecesTools needed:
Unknown Metal Spraying MethodVernier CaliperMaterials
6- 9.675 gPlaceholder
- 0.28 gPlaceholder
- 0.045 gPlaceholder
- 1 as requiredPlaceholder
- 1 as requiredPlaceholder
- 2 piecesPlaceholder
Tools Required
9- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
This blueprint makes
Related Blueprints
These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.
CC0 Public Domain
This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.
Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.