Hợp tác
NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Mine Suction Pump of Bored Logs: Perforated Trunk, Valve Box and Leather-Shoe Piston (Agricola, 1556)
Forge

Tạo bởi

Forge

14. tháng Mười Một 2026NO
9
0
0
0
0

Mine Suction Pump of Bored Logs: Perforated Trunk, Valve Box and Leather-Shoe Piston (Agricola, 1556)

Agricola's first suction pump for draining mine sumps, from De Re Metallica, Book VI (1556): logs bored into pipes stand on a perforated trunk two feet deep in the sump, with a bottomless metal valve box one palm deep; a workman on the flooring works a piston whose leather shoe, or better a perforated iron or wooden disc, lifts the water to a spout into the tunnel drain.
Nâng cao
Several days

Hướng dẫn

1

Units and lift

Đang tải sổ tay Jupyter…
2

Read De Re Metallica, Book VI

"Thus the workman, eager at his labour, standing on the flooring boards, pushes the piston down into the pipe and draws it out again."
3

Bore the pipes

Bore straight logs through their length to make the pipe, first with a borer with an auger and then with a wider borer (Illustration 177, O-Q). Use one length, or two with one joined into the other.

Vật liệu cho bước này:

Khúc gỗKhúc gỗ2 cái

Công cụ cần thiết:

Mũi khoan xoắn tayMũi khoan xoắn tay
Khoan tay xoắnKhoan tay xoắn
RìuRìu
Dao nạo hai cánDao nạo hai cán
4

Make the trunk and valve box

Make a trunk two feet deep, hollow like the pipe, its lower opening blocked with a round piece of wood and its sides perforated round about so water flows in. Make a box of iron, copper or brass one palm deep, without a bottom, closed by a rounded valve that stops the raised water running back. Set it in the top of the trunk if there is one pipe, or in the lower pipe at the joint if there are two.

Vật liệu cho bước này:

Khúc gỗKhúc gỗ1 cái
Tấm gỗ cứngTấm gỗ cứng1 cái
Tấm thép mềmTấm thép mềm1 cái
Da làm yên cươngDa làm yên cương1 cái

Công cụ cần thiết:

Mũi khoan xoắn tayMũi khoan xoắn tay
Đục gỗĐục gỗ
Cưa sắtCưa sắt
BúaBúa
Lò rènLò rèn
ĐeĐe
5

Set the pipe

Lay a flooring over the sump. Let the pipe down through it to the bottom of the sump with the trunk on its lower end, and fix it with pointed iron clamps driven in straight on both sides. Cut an opening or spout in the upper pipe reaching to the drain of the tunnel.

Vật liệu cho bước này:

Ván thôngVán thông4 cái
Thanh thép dẹtThanh thép dẹt2 cái
ĐinhĐinh1 cái

Công cụ cần thiết:

Cưa tayCưa tay
BúaBúa
Mũi khoan xoắn tayMũi khoan xoắn tay
6

Make the piston

Fit the piston rod with a hand-bar at the top. At the bottom fix either a shoe, a leather covering stitched almost cone-shaped, tight round the rod and wide open at the top, or (far better) a disc of iron one digit thick or of wood six digits thick, fixed by an iron key through the rod or screwed on, with five or six round or oval openings in a star and a cover over them, the same diameter as the inside of the pipe.

Vật liệu cho bước này:

Tấm gỗ cứngTấm gỗ cứng1 cái
Da làm yên cươngDa làm yên cương1 cái
Tấm thép mềmTấm thép mềm1 cái
Thanh thép dẹtThanh thép dẹt1 cái

Công cụ cần thiết:

DùiDùi
Hai kim khâu yênHai kim khâu yên
Khoan tayKhoan tay
Giũa (giũa tay)Giũa (giũa tay)
Cưa tayCưa tay
7

Pump

Standing on the flooring, push the piston down and draw it up. On the up-stroke the cover closes the disc openings and the water above is lifted to the spout, while the valve of the box opens and water from the trunk rises by suction; on the down-stroke the valve closes and the water passes up through the disc.
8

Troubleshooting

Suction pump troubleshooting.

Flow

Loading...
9

History and honest limits

From Georgius Agricola, **De Re Metallica** (1556), Book VI, translated by Herbert C. and Lou H. Hoover, 1912 (Gutenberg 38015; checked on the archive.org scan georgiusagricola00agri, pp. 176-177). He gives no bore, pipe length or lift. The metric equivalents of his Roman units, the suction limit and the tools are ours.

Vật liệu

7

Công cụ yêu cầu

14

Bản thiết kế này làm ra

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...