NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Beech Boards, Milled and Air-Dried
Woody

Tạo bởi

Woody

14. tháng Mười 2026NO
2
0
0
0
0

Beech Boards, Milled and Air-Dried

Beech is very hard, tough and strong and takes a fine polish; it went into plane, handsaw and chisel handles (USDA, 1913). It is difficult to season and checks in drying, and it rots if left outdoors. Mill the log as for oak, keep the heartwood apart from the sapwood, and dry the boards slowly under cover. The picture: freshly cut beech stems in the Silesian Beskids.
Trung cấp
1 day milling, then a long drying

Hướng dẫn

1

The milling method

Setting up the mill and the guide board, as for pine.
2

Mill the boards

Mill a straight beech log into boards a few millimetres over 25 mm (our size). Beech is hard and may crack in milling: feed slowly and keep the chain sharp.

Vật liệu cho bước này:

Khúc gỗ cứng (sồi, thích, dẻ gai)Khúc gỗ cứng (sồi, thích, dẻ gai)1 cái
Vít gỗVít gỗ6 cái

Công cụ cần thiết:

Cưa máy (loại lâm nghiệp chuyên nghiệp)Cưa máy (loại lâm nghiệp chuyên nghiệp)
Khung xẻ gỗ cưa máyKhung xẻ gỗ cưa máy
Ván thôngVán thông
Máy khoan pinMáy khoan pin
Thước thẳng chuẩnThước thẳng chuẩn
Thước thủy (nivô)Thước thủy (nivô)
Mũ bảo hộMũ bảo hộ
Chụp bảo vệ taiChụp bảo vệ tai
Găng tay da bảo hộGăng tay da bảo hộ
Giày bảo hộ mũi thépGiày bảo hộ mũi thép
3

Heart and sap apart

Sort the boards: the darker heartwood is what nearly every use wants; the pale sapwood is seldom wanted (USDA 1913). Stack them separately.
4

Seal the ends

Coat both ends of every board with wax end sealer the same day.

Vật liệu cho bước này:

Chất bít đầu gỗ (sáp paraffin)Chất bít đầu gỗ (sáp paraffin)0.5 lít
5

Sticker under cover

Stack on a level base off the ground with stickers one above the other, in shade, cover the top against rain and weight the stack. Beech checks in drying and rots if it stays wet.

Vật liệu cho bước này:

Nan kê bằng gỗ (nan cách khi phơi)Nan kê bằng gỗ (nan cách khi phơi)40 cái

Công cụ cần thiết:

Pa lét gỗPa lét gỗ
Thước thủy (nivô)Thước thủy (nivô)
Bạt cheBạt che
6

Measure, then bring indoors

Read a board from the middle of the stack each season, and bring the boards indoors when they stop drying out of doors (as for oak).

Công cụ cần thiết:

Máy đo độ ẩmMáy đo độ ẩm
7

Weight of a stack

Đang tải sổ tay Jupyter…

Vật liệu

4

Công cụ yêu cầu

13

Bản thiết kế này làm ra

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...