NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Blumlein Stereo
Penny

Tạo bởi

Penny

26. tháng Tám 2026DK
36
0
0
0
0

Blumlein Stereo

A single microphone captures how loud a sound is, and nothing whatever about where it came from. Alan Blumlein's 1931 patent set out the entire theory and practice of two-channel stereo — how to capture directional information with two coincident microphones, how to encode two channels in one groove using a stylus that moves in two perpendicular directions at once, and how the resulting signals recreate a spatial image between two loudspeakers. He filed it as one of 128 claims in a single patent, at the age of 28, and the system EMI eventually shipped decades later was essentially his. His crossed figure-of-eight technique is still called a Blumlein pair and is still used.
Nâng cao
4 hours 30 minutes

Hướng dẫn

1

Set up a coincident crossed pair

Two figure-of-eight microphones, same point in space, 90 degrees apart.

  1. Mount two figure-of-eight microphones with their capsules as close together as physically possible, one directly above the other.
  2. Angle them at 90 degrees to each other, so each points 45 degrees off the centre line.
  3. Feed one to the left channel and one to the right.
  4. Walk a sound source in an arc in front of them and listen on headphones.

Coincident is the crucial word. Because both capsules occupy nearly the same point, sound arrives at both at the same TIME — so the only difference between the channels is level, determined by each microphone's pattern. That gives a stereo image that survives being summed to mono, which spaced microphones do not. Blumlein understood this in 1931, before anyone had heard stereo reproduction.

Use the ribbon microphones from earlier in this batch. Their native figure-of-eight pattern is what makes this technique possible — it is not a coincidence that the ribbon and stereo arrive within a decade of each other.

Vật liệu cho bước này:

Audio Cable TRRS - 45cm (pigtail)Audio Cable TRRS - 45cm (pigtail)1 cái
Audio Jack - 1/4 Stereo (vertical)Audio Jack - 1/4 Stereo (vertical)1 cái

Công cụ cần thiết:

Máy hiện sóng sốMáy hiện sóng số
Thước ke tổ hợpThước ke tổ hợp
Card âm thanh (USB-C)Card âm thanh (USB-C)
2

Measure how direction becomes level difference

Turn the effect into numbers so the mechanism is unmistakable.

  1. Place a tone source directly ahead and record both channel levels — they should be equal.
  2. Move it 30 degrees left and record both again.
  3. Continue in steps to 90 degrees left, then repeat to the right.
  4. Tabulate left level, right level, and their difference against angle.
Straight ahead the levels match, so the image sits centrally. Off to one side, one microphone's pattern favours the source while the other's rejects it, and the level difference grows steadily with angle. Your ear interprets that inter-channel level difference as direction — which is the entire mechanism of stereo. No time delays, no phase tricks, just two numbers whose ratio encodes an angle.

Vật liệu cho bước này:

Giấy kẻ ô lyGiấy kẻ ô ly1 pad

Công cụ cần thiết:

Máy phát tín hiệu DDSMáy phát tín hiệu DDS
Máy hiện sóng sốMáy hiện sóng số
Đồng hồ vạn năng số cấp phòng thí nghiệmĐồng hồ vạn năng số cấp phòng thí nghiệm
Thước ke tổ hợpThước ke tổ hợp
3

Encode two channels in one groove

The stylus must move in two independent directions at once — this is Blumlein's other great idea.

  1. Model the groove as a V with two walls at 45 degrees to the surface.
  2. Let one channel move the stylus along one wall's normal, and the other along the other wall's.
  3. Confirm that the two directions are perpendicular, so neither channel affects the other.
  4. Work out what happens when both channels carry the same signal, and when they carry opposite signals.

Identical signals move the stylus purely laterally; opposite signals move it purely vertically. That is the beautiful part — a stereo record played with a mono lateral pickup reproduces the sum of the two channels correctly, so the format is backward compatible with every mono player already in existence. Blumlein designed that compatibility in from the start.

This 45/45 system is what all stereo records use. The alternative proposals of the 1950s — one channel lateral, one vertical — were rejected precisely because they lacked this symmetry, and treated the two channels unequally.

Vật liệu cho bước này:

Tấm acrylicTấm acrylic1 tờ
Giấy kẻ ô lyGiấy kẻ ô ly1 pad

Công cụ cần thiết:

Thước cặp điện tử 6 inchThước cặp điện tử 6 inch
Thước ke tổ hợpThước ke tổ hợp
Máy hiện sóng sốMáy hiện sóng số
4

Test the mono compatibility and the phase trap

Stereo that collapses badly to mono was a real commercial problem, so check it.

  1. Record a source with your Blumlein pair and listen in stereo.
  2. Sum the two channels electrically and listen in mono — the image collapses to the centre but nothing disappears.
  3. Now deliberately reverse the polarity of one channel and sum again.
  4. Listen to what happens to the centre.
With one channel inverted, anything common to both channels cancels — and that is usually the lead vocal and the bass, sitting in the centre. Broadcast engineers checked mono compatibility obsessively for decades because most listeners had mono radios, and a record that sounded good in stereo and hollow in mono was commercially damaged. Blumlein's coincident technique is inherently well behaved here; spaced microphone techniques are not.

Công cụ cần thiết:

Máy hiện sóng sốMáy hiện sóng số
Card âm thanh (USB-C)Card âm thanh (USB-C)
Đồng hồ vạn năng số cấp phòng thí nghiệmĐồng hồ vạn năng số cấp phòng thí nghiệm
5

One patent, an entire format, and history

Alan Dower Blumlein filed his stereo patent in 1931 at EMI, aged 28. Its 128 claims cover the crossed-pair recording technique, the 45/45 groove, stereo film sound, and the matrix arithmetic for converting between left/right and sum/difference representations. He made demonstration films with stereo soundtracks in 1935 that still exist. He was killed in 1942 testing airborne radar, aged 38, having also made fundamental contributions to television and radar.

The sum-and-difference idea in his patent outlived even the format. Encoding two channels as their sum and their difference rather than as left and right is exactly how FM stereo radio works — the sum goes out as the ordinary mono signal that any receiver can use, and the difference is carried separately for receivers that can decode it. The same trick reappears in television colour encoding and in audio compression. Blumlein was working out the general theory, not just a record format.

Why it took twenty-five years to ship. The patent was decades ahead of the industry: stereo discs needed better pickup cartridges, better vinyl, and consumers with two loudspeakers. Commercial stereo records arrived in 1958, twenty-seven years after the patent and sixteen years after Blumlein's death, using essentially his system unchanged.

Its honest limits: a coincident pair gives excellent image stability and a somewhat narrower, drier sound than spaced microphones; the figure-of-eight patterns pick up the room behind as much as the front, so it demands a good acoustic; and it captures no time-of-arrival cues, which some listeners find makes the image less enveloping. Engineers choose between coincident and spaced techniques exactly on those grounds.

Vật liệu

4

Công cụ yêu cầu

6
Tổng ước tính
Những gì người làm đã mua. Vật liệu không hiện giá thì bạn mua ở đâu tuỳ bạn.
$3.74

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...