NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Borosilicate Beakers Made from Wide Glass Tube
Bubbles

Tạo bởi

Bubbles

14. tháng Mười 2026IT
4
0
0
0
0

Borosilicate Beakers Made from Wide Glass Tube

A beaker is a glass cylinder with a flat bottom and a small pouring lip; the usual low form, devised by John Joseph Griffin, is about 1.4 times as tall as it is wide. Made from wide borosilicate tube, it takes the heat of a flame or hot plate: close one end flat, open and lip the other, anneal, and mark the volumes. The picture: a small low-form beaker with its pouring lip and volume marks.
Nâng cao
An hour per beaker, plus annealing

Hướng dẫn

1

Cut a length of tube

Choose wide borosilicate tube and score and snap a length a little more than 1.4 times its diameter.

Vật liệu cho bước này:

Bộ ống thủy tinhBộ ống thủy tinh1 cái

Công cụ cần thiết:

Bút vạch dấu mũi kim cươngBút vạch dấu mũi kim cương
Thước cặp điện tử 6 inchThước cặp điện tử 6 inch
Kính bảo hộKính bảo hộ
2

Close the bottom flat

Turn one end in the flame until soft, pull off the end to close it as for a test tube, then heat the closed end and press it flat on a graphite or steel plate, turning, until it stands level.

Công cụ cần thiết:

Đèn khò thổi thủy tinh để bànĐèn khò thổi thủy tinh để bàn
Nhíp (phòng thí nghiệm)Nhíp (phòng thí nghiệm)
Kính bảo hộKính bảo hộ
Găng tay chịu nhiệtGăng tay chịu nhiệt
3

Flare the rim, pull a lip

Heat the open end and flare it slightly with the jacks so the rim is thickened and smooth. Heat one spot of the rim and push it out with a pointed tool to form the pouring lip.

Công cụ cần thiết:

Đèn khò thổi thủy tinh để bànĐèn khò thổi thủy tinh để bàn
Jacks (kìm của người thợ thủy tinh)Jacks (kìm của người thợ thủy tinh)
Kính bảo hộKính bảo hộ
Găng tay chịu nhiệtGăng tay chịu nhiệt
4

Anneal

Put the hot beaker straight into a kiln held at the glass's annealing temperature, soak it, and let it cool slowly so no strain is left.

Công cụ cần thiết:

Lò nungLò nung
Găng tay chịu nhiệtGăng tay chịu nhiệt
5

Mark the volumes

Pour in measured water from a measuring cylinder a step at a time and scratch a line at each level with the diamond scriber.

Vật liệu cho bước này:

NướcNước1 lít

Công cụ cần thiết:

Ống đongỐng đong
Bút vạch dấu mũi kim cươngBút vạch dấu mũi kim cương
6

Griffin proportions

Đang tải sổ tay Jupyter…
7

Limits

The shape and proportions are as Wikipedia gives them; the working steps are our lampwork practice. Only borosilicate takes heating; an unannealed beaker can crack on its own.

Vật liệu

2

Công cụ yêu cầu

9

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...