NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO

Brick Blacksmith's Forge with a Bottom-Blast Tuyere
A forge is a hearth with a bowl for the fire and an opening in its bottom, the tuyere, through which the blast of air is forced. One smith's forge of the 1880s was two feet four inches high and four feet square, built of brick and stone, with a 12-inch chimney flue, the tuyere iron set four inches below the surface and the forge hollow underneath so the fire could be dumped and the ashes cleared. Advice of the same time: keep the tuyere's centre at least eighteen inches from the back wall and the working side, set its top four to six inches below the hearth (deeper for heavy work), and leave a recess in the back wall at least 8 inches deep, 24 high and 24 wide. The blast came from a blower or bellows.
Trung cấp
Several days
Hướng dẫn
1
1
Build the base
Build the base
Build the hearth of brick and stone, about two feet four inches high and four feet square (one smith's size), hollow underneath with an opening for the ash.
Vật liệu cho bước này:
Gạch đất sét nung1 as required
Đá1 as requiredCông cụ cần thiết:
Bay xây2
2
Back wall and recess
Back wall and recess
Raise the back wall and chimney with a 12-inch flue; leave a recess at least 8 in deep, 24 in high and 24 in wide behind the fire.
Vật liệu cho bước này:
Ống khói1 cáiCông cụ cần thiết:
Bay xây3
3
Set the tuyere
Set the tuyere
Set the tuyere with its centre at least 18 in from the back wall and the working side, its top 4–6 in below the hearth surface.
Vật liệu cho bước này:
Ống gió lò rèn bằng gang1 cái4
4
Blast
Blast
Connect the blower or bellows to the tuyere pipe, with a way to open it underneath and clear cinders.
Công cụ cần thiết:
Quạt lò rèn quay tayVật liệu
4- 1 as requiredTạm thời
- 1 as requiredTạm thời
- 1 cáiTạm thời
- Tạm thời
Bản thiết kế này làm ra
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.





