NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO

Cooke Triplet Lens
Nineteenth-century lens makers flattened the image with a stop placed in front of or behind the lens, at the cost of astigmatism at the edges. Harold Dennis Taylor, optical manager at T. Cooke & Sons of York, dropped that trick entirely. He showed that a negative lens images a flat object onto a surface curved exactly as much as a positive lens of equal power, but the other way - so one can cancel the other.
**US 540,122**, "Lens", Taylor, filed 5. February 1894, granted 28. May 1895, puts "a negative lens … between two positive lenses, the focal power of the negative lens being approximately equal to the combined focal powers of the two positive lenses". Three separated elements: the Cooke triplet, still the simplest well-corrected camera lens.
**You build one from stock lenses**, and compare how flat its image is with a single lens.
Trung cấp
2 hours
Hướng dẫn
1
1
Choose three lenses
Choose three lenses
Two convex lenses of about 100 mm focal length (check each on a distant window) and one concave of about -50 mm. Powers: +10 and +10 dioptres against -20.
Vật liệu cho bước này:
Bộ thấu kính hội tụ1 bộ
Thấu kính lõm1 cáiCông cụ cần thiết:
Thước thép2
2
Mount the triplet
Mount the triplet
On the bench: convex, 20 mm gap, concave, 20 mm gap, convex. Centre all three on the same height.
Công cụ cần thiết:
Băng quang học và ray trượt
Bộ giá giữ thấu kính3
3
Light a grid
Light a grid
Tape graph paper to a window or light it from behind with a torch, 1.5 m from the lens. Put a tracing-paper screen behind the triplet and focus the centre of the grid sharply.
Vật liệu cho bước này:
Giấy kẻ ô ly1 tờ
Cuộn giấy can rập1 tờ
Băng keo giấy1 cuộnCông cụ cần thiết:
Đèn pin LED soi kiểm tra
Thước dây cuộn4
4
Measure the edge refocus
Measure the edge refocus
Without touching the lenses, move the screen until the grid 15 mm from the image centre is sharpest. Note how far it moved. Replace the triplet with one convex lens, refocus the centre, and measure the refocus again at the same 15 mm image height.
Công cụ cần thiết:
Thước thép5
5
Petzval sum and design
Petzval sum and design
Đang tải sổ tay Jupyter…
6
6
History & Context
History & Context
**What the patent specifies:** a negative lens between two positive lenses, its power about equal to theirs combined, each element free of diaphragm corrections, flattening the field and removing marginal astigmatism. **Modern build (derived):** three stock singlets on a bench.
Taylor's employer declined to make it; Taylor, Taylor & Hobson did, as the Cooke lens. Tessar and many later designs grew from it. Its limits: with only three elements the aperture and angle of view are modest before aberrations return.

Vật liệu
5- Tạm thời
- 1 cáiTạm thời
- 1 tờTạm thời
- Tạm thời
- 1 cuộnTạm thời
Công cụ yêu cầu
5- Tạm thời
- Băng quang học và ray trượtHoa hồng 10%Tạm thời
- Bộ giá giữ thấu kínhHoa hồng 10%Tạm thời
- Tạm thời
- 1 vendor sell this, none ship to you yetTạm thời
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

