NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO

Crushed Terracotta for Cocciopesto, Coarse and Fine
Broken pottery, tile or brick, crushed and mixed with lime, made the Roman waterproof mortar opus signinum (cocciopesto), used for baths, aqueducts and cisterns. Pliny says the broken pottery was beaten to powder. Crush fired brick or tile and sieve it into a coarse grade and a fine powder.
The picture: a fragment of Roman pavement, broken pottery set in lime.
Cơ bản
Half a day
Hướng dẫn
1
1
Break it up
Break it up
Put fired bricks or tile pieces in a sack and break them with the sledgehammer into pieces smaller than a walnut. Wear glasses.
Vật liệu cho bước này:
Gạch đất sét nung3 cáiCông cụ cần thiết:
Bao đay
Búa tạ
Kính bảo hộ2
2
Sieve the coarse grade
Sieve the coarse grade
Shake the crush through the sieve. What passes is the coarse grade; what stays goes back in the sack to be crushed again.
Công cụ cần thiết:
Sàng
Xô3
3
Pound to powder
Pound to powder
Pound some of the coarse grade in the mortar and shake it through the fine sieve. What passes is the fine powder.
Công cụ cần thiết:
Cối và chày bằng đá
Rây lưới mịn
Xô
Kính bảo hộ4
4
Store
Store
Keep each grade dry in its own bucket, ready to mix with lime.
Công cụ cần thiết:
Xô5
5
Sorting the crush
Sorting the crush
Đang tải sổ tay Jupyter…
Vật liệu
1- 3 cáiTạm thời
Bản thiết kế này làm ra
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.





