NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Barking Mulberry — Raw Material Harvesting for Hanji
English
KimSonDol

Tạo bởi

KimSonDol

22. tháng Tư 2026KR
21
0
0
0
0

Barking Mulberry — Raw Material Harvesting for Hanji

This blueprint explains the method of harvesting bark from mulberry trees (Broussonetia papyrifera), the first step in hanji (韓紙) production. It covers the entire process from appropriate felling timing, bark removal, separation of outer bark and inner bark, drying, and storage. This is the raw material acquisition technique that serves as the starting point for traditional Korean hanji papermaking craft.

Cơ bản
4-6 hours

Hướng dẫn

1

Understanding the Paper Mulberry Tree

The paper mulberry (Broussonetia papyrifera) is a deciduous tree in the mulberry family that grows 3-10 meters tall. Its leaves are large and rough, with fine hairs on young branches. It grows throughout Korea and is cultivated specifically for hanji (traditional Korean paper) in Jeolla-do and Gyeongsang-do provinces.
2

Determining the Harvesting Period

Paper mulberry harvesting is done between November and January, after all leaves have fallen. During this period, sap flow has stopped so the bark peels off cleanly, and fiber quality is at its best. Branches cut in spring or summer have weak fibers.
3

Selecting 1-3 Year Old Branches

Fibers for hanji are obtained from 1-3 year old branches. Select straight branches with few side shoots, 1.5-3 cm in diameter. Branches older than 3 years have coarse fibers, and branches younger than 1 year yield too little material.

Vật liệu cho bước này:

Paper Mulberry Branches (1-3 year)Paper Mulberry Branches (1-3 year)20 cái
4

Cutting the Branches

Cut at 5-10 cm above ground level using pruning shears or a sickle. Cutting at an angle prevents rainwater from pooling and rotting the stump. New branches will grow from the same stump the following year.

Công cụ cần thiết:

Pruning ShearsPruning Shears
SickleSickle
5

Cutting Branches to Uniform Length

Cut the harvested branches to 1-1.2 meter lengths. This is the standard length used in hanji production. Remove all side branches.

Công cụ cần thiết:

SawSaw
6

Bundling the Branches

Bundle 20-30 cut branches together. Tie them at both ends and in the middle with straw or twine. Bundles that are too large will not fit in the steaming pot.

Vật liệu cho bước này:

Binding TwineBinding Twine3 mét
7

Steaming the Branches

Place water in a large pot or drum and stand the paper mulberry bundles upright on top. Cover with a lid and steam for 2-3 hours. Steaming softens the bark so it peels off cleanly.

Vật liệu cho bước này:

Water for Steaming30 lít

Công cụ cần thiết:

Large Steaming Pot or DrumLarge Steaming Pot or Drum
FirewoodFirewood
8

Stripping the Bark

While the steamed branches are still warm, make a knife cut at the top and pull downward — the bark will strip off in one piece. Hold the branch with one hand and pull the bark with the other. Work quickly as the bark becomes difficult to peel once it cools.

Công cụ cần thiết:

Small KnifeSmall Knife
Work Gloves (Cotton)
9

Separating the Black Bark (Heukpi)

The stripped bark consists of an outer black layer (heukpi) and an inner white layer (baekpi). Scrape off the black bark with a knife. If black bark remains, it will cause dark spots in the hanji, so it must be thoroughly removed.

Công cụ cần thiết:

Scraping KnifeScraping Knife
10

Inspecting the White Bark (Baekpi)

The white bark with the black bark removed is cream to light brown in color. When torn by hand, long tough fibers are visible. This is the bast fiber that is the raw material for hanji. Longer fibers produce stronger hanji.
11

Washing the White Bark

Wash the white bark in cold running water to remove residual debris and sap. Rub gently while washing, taking care not to damage the fibers.

Vật liệu cho bước này:

Clean WaterClean Water20 lít

Công cụ cần thiết:

Washing BasinWashing Basin
12

Drying the White Bark

Spread the washed white bark and dry in sunlight. Hang on a clothesline or spread on a bamboo rack. Dry for 2-3 days until completely dry. Bring in immediately if it rains.

Công cụ cần thiết:

Drying RackDrying Rack
ClotheslineClothesline
13

Checking the Drying State

Fully dried white bark is stiff and lightweight, making a snapping sound when bent. If any moist areas remain, mold can grow, so it must be completely dried.
14

Bundling and Storing the Dried White Bark

Neatly gather the dried white bark and tie with twine. Store in a cool, well-ventilated location. If protected from moisture and direct sunlight, it can be stored for over a year. Soak in water before use.

Vật liệu cho bước này:

Binding TwineBinding Twine2 mét
15

Managing the Paper Mulberry Stumps

After harvesting, remove weeds around the stump. A healthy stump will produce 5-8 new branches in spring. It can be harvested again after 3 years, and a single stump can be harvested repeatedly for over 30 years.

Vật liệu

4

Công cụ yêu cầu

11

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...