NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Eyecup Goggles: Shindel, 1919
Emma

Tạo bởi

Emma

12. tháng Mười 2026SE
1
0
0
0
0

Eyecup Goggles: Shindel, 1919

Harry F. Shindel of Reading, Pennsylvania, assigned to T. A. Willson & Co., patented this goggle eye cup in 1919, US 1,296,707. Each cup is folded from one punched blank of sheet material: a beaded outer edge rests on the face round the eye and a recessed inner edge holds the lens. The ends of the folded blank turn outwards and are held together by a sliding channel-section sheath, which also carries the head-strap connection. Ventilating holes in the cup wall let air in, while a folded, crosswise-corrugated guard strip inside keeps out dirt and side light.
Trung cấp
Workshop process

Hướng dẫn

1

Punch the blank

Punch the eye-cup blank from sheet material with a beaded outer edge, a shorter inner edge that forms the lens recess, and the ventilating holes.

Vật liệu cho bước này:

Kim loại tấmKim loại tấm1 as required

Công cụ cần thiết:

Máy dậpMáy dập
2

Fold and fit lens and guard

Fold the blank into a cup with its ends turned outwards. Set the lens in the recess and the corrugated guard strip inside the wall over the holes.

Vật liệu cho bước này:

Tròng kính bảo hộTròng kính bảo hộ1 cái
Dải gợn sóng bảo vệ lỗ thông khíDải gợn sóng bảo vệ lỗ thông khí1 cái

Công cụ cần thiết:

Kìm điện đa năngKìm điện đa năng
3

Clamp

Slide the clamping sheath onto the turned-out ends from its outer end until its stop meets them; its tapered flanges wedge the ends together and lock lens and guard in place.

Vật liệu cho bước này:

Ống kẹp cốc mắtỐng kẹp cốc mắt1 cái
4

Pair and strap

Two such cups, with the head strap fastened to the head-band connections on their sheaths, make the goggles.

Vật liệu cho bước này:

Dây đeo đầu kính bảo hộDây đeo đầu kính bảo hộ1 cái

Vật liệu

5

Công cụ yêu cầu

2

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...