NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Ferrosilicon: Silica, Carbon and Scrap Iron Smelted with Bituminous Coal in an Electric Furnace (Furness, US 1,284,645)
Charlie

Tạo bởi

Charlie

31. tháng Mười 2026DE
0
0
0
0
0

Ferrosilicon: Silica, Carbon and Scrap Iron Smelted with Bituminous Coal in an Electric Furnace (Furness, US 1,284,645)

Carbon pulls the oxygen out of silica in an electric furnace, and the silicon alloys with iron in the charge. Furness swapped part of the coke or charcoal for lumps of bituminous coal, which keep the charge open and poorly conducting, so the electrodes sit deep and the heat stays in. Result: ferrosilicon, tapped from the bottom of the furnace. Source: Furness, US 1,284,645 (1918). Not given: silicon content, iron proportion. Picture drawn by Youblob.
Nâng cao
Factory process

Hướng dẫn

1

Weigh the charge

Crushed quartzite (silica), charcoal or coke, and scrap steel or iron ore. Carbon: 24 parts per 60 parts of silica in theory, slightly more in practice; more if iron ore is used. Ours: quartz sand, iron filings, charcoal.

Vật liệu cho bước này:

Cát thạch anhCát thạch anh60 parts
Mạt sắtMạt sắt1 as required

Công cụ cần thiết:

Than củiThan củi
Cân hai đĩaCân hai đĩa
2

Add lumps of bituminous coal

Supply 20-40 % of the total carbon as bituminous coal (10 % or more works). It can go in coarse, lumps up to fist size, keeping the charge open to the gas.

Công cụ cần thiết:

Than bitumThan bitum
3

Smelt with deeply bedded electrodes

Feed the charge into an electric furnace so the electrodes stay buried deep in it. The silica is reduced, carbon monoxide burns off at the top, and the alloy collects at the bottom. Ours: electric arc furnace.

Công cụ cần thiết:

Lò hồ quang điệnLò hồ quang điện
4

Tap the ferrosilicon

Tap the molten ferrosilicon from the bottom of the furnace and let it set.

Công cụ cần thiết:

Lò hồ quang điệnLò hồ quang điện

Vật liệu

2
  • Tạm thời
  • 1 as required
    Tạm thời

Công cụ yêu cầu

4

Bản thiết kế này làm ra

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...