NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Gasoline by Pressure Cracking: Heavy Residue Distilled at 650-850 °F under 4-5 Atmospheres (Burton, US 1,049,667)
Charlie

Tạo bởi

Charlie

29. tháng Mười 2026DE
3
0
0
0
0

Gasoline by Pressure Cracking: Heavy Residue Distilled at 650-850 °F under 4-5 Atmospheres (Burton, US 1,049,667)

Straight distillation leaves most of a barrel of crude as heavy oil. Burton's 1913 patent turns that residue into gasoline: distil it hot while its own vapour is held at 4 to 5 atmospheres, all the way through the condenser. The heat and pressure break the heavy oil into light oil. Cracked gasoline is the first rung toward high-octane fuel. Feed: the fuel-oil and gas-oil residue left after the light cuts, boiling at about 600 to 700 °F (claim: above 500 °F). Source: W. M. Burton, US 1,049,667 (1913), assigned to Standard Oil (Indiana). Not given: charge size, run time, yield. Burton claims the gasoline stays in the paraffin series; that is his claim. A fired still under pressure needs a working safety valve. Picture: the patent drawing.
Chuyên gia
2 days

Hướng dẫn

1

Fill the pressure still with residue

The still is a closed, boiler-like holder over a fire chamber, with a safety valve, a pressure gauge, and a thermometer in an oil-filled tube slanting into it. Fill it with the heavy residue left after the gasoline and illuminating oils have been distilled off.

Vật liệu cho bước này:

Cặn dầu mỏCặn dầu mỏ1 still charge

Công cụ cần thiết:

Nồi chưng áp suấtNồi chưng áp suất
Đồng hồ áp suấtĐồng hồ áp suất
Nhiệt kếNhiệt kế
2

Close the outlet and fire it

A pipe rises from the top of the still to a water-cooled condenser coil, then runs to a receiver tank. Keep the shut-off valve after the coil closed and fire the still. The vapours build up 4 to 5 atmospheres on the liquid, and its boiling point rises from 500-600 °F to 750-800 °F.

Công cụ cần thiết:

Nồi chưng áp suấtNồi chưng áp suất
Dàn ống ngưng tụDàn ống ngưng tụ
NướcNước
Đồng hồ áp suấtĐồng hồ áp suất
3

Distil at 650 to 850 °F under pressure

Distil at about 650 to 850 °F. Keep the pressure on the vapours the whole way, in the still and while they condense in the coil. The heat and pressure turn the heavy oil into low-boiling oil.

Công cụ cần thiết:

Nồi chưng áp suấtNồi chưng áp suất
Nhiệt kếNhiệt kế
Đồng hồ áp suấtĐồng hồ áp suất
4

Draw off the gasoline from time to time

Open the shut-off valve now and then to run the condensed gasoline into the receiver. Do it often enough that the coil never fills with liquid.

Công cụ cần thiết:

Dàn ống ngưng tụDàn ống ngưng tụ
Bể chứa dầuBể chứa dầu
5

Let off the gas

Gas that will not condense collects in the coil and blocks it. Release it from time to time through the relief valve on the pipe rising from the lower end of the coil. Burton does not say what becomes of it. Ours: collect it under pressure if it is to be used.

Công cụ cần thiết:

Dàn ống ngưng tụDàn ống ngưng tụ
Bình khí chịu áp suấtBình khí chịu áp suất

Vật liệu

1

Công cụ yêu cầu

7

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...