NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO

Gelatin from Bones and Skins
Gelatin is collagen broken down by hydrolysis. Most is made from by-products of the meat and leather trades: pork skins, pork and cattle bones, and split cattle hides. The same thing happens at home when cartilaginous cuts or bones are boiled and the cooled stock sets to a jelly. Commercially the raw material is cleaned, the collagen is hydrolysed with acid (type A gelatin, suited to pig skin, 10–48 hours) or alkali (type B, suited to cattle hide, several weeks), the gelatin is extracted in hot water in several stages, and the solution is filtered, evaporated, dried, ground and sifted at the lowest temperatures possible to keep its gel strength.
Nâng cao
Days to weeks
Hướng dẫn
1
1
Pretreat the raw material
Pretreat the raw material
Bones: remove calcium and other salts with dilute acid, and reduce the fat with hot water to no more than 1%. Skins and hides: cut down, wash, remove hair and degrease.
Vật liệu cho bước này:
Xương1 as required
Da heo1 as required
Dung dịch axit loãng1 as required
Nước1 as required2
2
Hydrolyse the collagen
Hydrolyse the collagen
Treat with acid (10 to 48 hours, gives type A gelatin; suits pig skin) or alkali (several weeks, gives type B; suits cattle hide).
Công cụ cần thiết:
Bể chiết gelatin3
3
Extract
Extract
Extract the gelatin with hot water or dilute acid in several stages, raising the temperature at each later stage.
Công cụ cần thiết:
Bể chiết gelatin4
4
Recover
Recover
Filter, evaporate, dry, grind and sift the gelatin, at the lowest temperature possible, in several quick stages so the protein is not degraded.
Công cụ cần thiết:
Máy ép lọc
Thiết bị bốc hơi
Máy nghiền
RâyVật liệu
4- 1 as requiredTạm thời
- 1 as requiredTạm thời
- 1 as requiredTạm thời
- 1 as requiredTạm thời
Công cụ yêu cầu
5- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
Bản thiết kế này làm ra
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.


