NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Hardwood Logs: Tree Felled with Notch and Back Cut, Limbed and Bucked
Woody

Tạo bởi

Woody

14. tháng Mười 2026NO
3
0
0
0
0

Hardwood Logs: Tree Felled with Notch and Back Cut, Limbed and Bucked

Logs come from a felled tree. Cut a V-shaped notch on the side you want it to fall, then a back cut from the other side toward it; the strip left between them is the hinge that steers the fall. Then cut off the branches (limbing) and saw the trunk into logs (bucking). The picture: fallers on springboards beside a notched conifer, Clallam County, Washington, about 1905 (MOHAI 5981): the notch is the same on any tree.
Nâng cao
A day

Hướng dẫn

1

Plan the fall

Choose a sound hardwood tree such as oak, maple or beech. Look at its lean and the wind, pick a clear line to fall it on, and clear two escape paths back and to the side.

Vật liệu cho bước này:

Cây - rụng láCây - rụng lá1 cái

Công cụ cần thiết:

Mũ bảo hộMũ bảo hộ
2

Cut the notch

On the side of the fall, chop a V-shaped notch about a quarter of the way into the trunk (our choice). Its back line sets the direction.

Công cụ cần thiết:

RìuRìu
Mũ bảo hộMũ bảo hộ
3

Back cut, leave the hinge

Saw in from the opposite side, a little above the bottom of the notch. Stop short, leaving a strip of wood uncut: the hinge. Tap a wedge into the cut to tip it. Walk away along your escape path as it goes.

Công cụ cần thiết:

Cưa xẻ hai ngườiCưa xẻ hai người
Nêm hạ cây bằng gỗNêm hạ cây bằng gỗ
RìuRìu
Mũ bảo hộMũ bảo hộ
4

Limb it

Cut the branches off flush with the trunk, working from the base toward the top, standing on the other side of the trunk from the branch.

Công cụ cần thiết:

RìuRìu
Mũ bảo hộMũ bảo hộ
5

Buck into logs

Mark the lengths you need with the chalk line and saw the trunk through at each mark. Prop the trunk so the cut opens and does not pinch the saw.

Công cụ cần thiết:

Cưa xẻ hai ngườiCưa xẻ hai người
Dây bật mựcDây bật mực
Nêm hạ cây bằng gỗNêm hạ cây bằng gỗ
6

How much wood is in the logs

Đang tải sổ tay Jupyter…
7

Limits

Notch, back cut, hinge, limbing and bucking follow Wikipedia's account of tree felling; the notch depth is ours. A falling tree kills: fell only trees you are able to, with no one inside two tree-lengths.

Vật liệu

1

Công cụ yêu cầu

5

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...