NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Horseshoe Nails Forged and Headed from Iron Rod
Forge

Tạo bởi

Forge

14. tháng Mười 2026NO
1
0
0
0
0

Horseshoe Nails Forged and Headed from Iron Rod

Horseshoe nails hold the shoe through the hard outer wall of the hoof. They are shaped to bend outward as they are driven, so the point comes out through the wall, where it is cut off and clinched over. A shoe complete with its nails was found in a fifth-century grave. Draw a flat tapering shank, bevel the point on one side, and head it. The picture: horseshoe nails in three sizes.
Trung cấp
Half a day

Hướng dẫn

1

Draw the shank

Heat the end of the rod and draw a flat, tapering shank about 45 mm long, thinner toward the point.

Vật liệu cho bước này:

Que sắt rènQue sắt rèn2 m

Công cụ cần thiết:

Lò rèn của thợ rènLò rèn của thợ rèn
ĐeĐe
Búa đầu nêm ngangBúa đầu nêm ngang
Kìm rènKìm rèn
Găng tay hànGăng tay hàn
Kính bảo hộKính bảo hộ
2

Bevel the point

Forge a short bevel on one face of the point only. Mark that face: it goes toward the inside of the hoof, so the nail turns outward.

Công cụ cần thiết:

ĐeĐe
Búa đầu nêm ngangBúa đầu nêm ngang
Kìm rènKìm rèn
Găng tay hànGăng tay hàn
Kính bảo hộKính bảo hộ
3

Cut and head

Nick the rod on the hardy a little above the shank, drop the shank into the header, snap it off and hammer the stub into a tapered, wedge-shaped head that will sit in the nail hole of the shoe.

Công cụ cần thiết:

Lò rèn của thợ rènLò rèn của thợ rèn
Đục cắt trên đeĐục cắt trên đe
Bàn tạo đầu đinhBàn tạo đầu đinh
Búa đầu nêm ngangBúa đầu nêm ngang
Kìm rènKìm rèn
Găng tay hànGăng tay hàn
Kính bảo hộKính bảo hộ
4

Finish

Let them cool in air so the iron stays soft enough to clinch. File off any burr and check each one is straight.

Công cụ cần thiết:

Giũa kim loạiGiũa kim loại
5

Nails for a set

Đang tải sổ tay Jupyter…

Vật liệu

1

Công cụ yêu cầu

9

Bản thiết kế này làm ra

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...