NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO

Incense Sticks: Charcoal and Gum Paste Rolled onto Bamboo Cores
A cored incense stick is a thin bamboo stick coated in a thick layer of combustible paste that smoulders away with the core. Charcoal dust is the fuel, a little saltpetre keeps it burning and a gum binds it. Roll the paste onto bamboo sticks, trim them and dry them slowly so they do not warp.
The picture: our diagram, coated sticks, one smouldering.
Cơ bản
An afternoon, then drying
Hướng dẫn
1
1
Split the cores
Split the cores
Split bamboo into thin, straight sticks of even length.
Vật liệu cho bước này:
Cây tre1 cáiCông cụ cần thiết:
Dao
Thớt2
2
Make the paste
Make the paste
Grind charcoal dust finer with a little saltpetre and sieve it. Dissolve gum arabic in a little water and knead it into the dust to a stiff, smooth dough. Wear a mask.
Vật liệu cho bước này:
Than củi - nghiền mịn80 g
Kali nitrat (diêm tiêu)5 g
Gôm arabic8 gCông cụ cần thiết:
Cối và chày
Rây mịn
Bát
Nước
Khẩu trang chống bụi3
3
Roll
Roll
Roll a little paste into a thin coil, lay a stick beside it and roll the two together on the board until the stick is centred and coated, leaving a bare handle.
Công cụ cần thiết:
Thớt4
4
Dry slowly
Dry slowly
Trim the ends and lay the sticks on a tray in the shade, turning them now and then, until hard and dry.
Công cụ cần thiết:
Khay phẳng để phơi
Dao5
5
Paste for your sticks
Paste for your sticks
Đang tải sổ tay Jupyter…
Vật liệu
4- 1 cáiTạm thời
- Tạm thời
- Tạm thời
- 8 gTạm thời
Bản thiết kế này làm ra
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.
