NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Paracord: Seven Twisted Nylon Yarns in a 32-Strand Braided Sheath
Tex

Tạo bởi

Tex

18. tháng Mười 2026FO
19
0
0
0
0

Paracord: Seven Twisted Nylon Yarns in a 32-Strand Braided Sheath

Parachute cord is a nylon core inside a braided nylon sheath. In the military Type III ('550 cord'), each core yarn is three bundles of fibre twisted tight, 7 to 9 yarns make the core, a 32-strand sheath is plaited over them, and the cord is steamed to tighten it (Wikipedia, from MIL-C-5040H). It must hold at least 550 lb. The picture: Type III paracord opened to show its core yarns (Wikimedia Commons).
Nâng cao
Days

Hướng dẫn

1

Twist the core yarns

Twist three bundles of nylon fibre tightly together into one core yarn. Make seven core yarns, as long as the cord you want.

Vật liệu cho bước này:

Sợi nylonSợi nylon100 g

Công cụ cần thiết:

Con quay xe sợiCon quay xe sợi
Thước kẻThước kẻ
2

Set up 32 sheath strands

Lay the seven core yarns together through the centre of the stand. Hang 32 nylon strands round its rim for the sheath.

Công cụ cần thiết:

Giá bện trònGiá bện tròn
3

Plait the sheath over the core

Braid the 32 strands round and over the core, keeping the tension even, so the sheath closes tight round the yarns.

Công cụ cần thiết:

Giá bện trònGiá bện tròn
4

Steam it tight

Steam the finished cord to tighten it.

Công cụ cần thiết:

Bàn là hơi cầm tayBàn là hơi cầm tay
5

Check it

Type III should give at least 225 ft per pound of cord, hold at least 550 lb, and stretch at least 30 % before it breaks.

Công cụ cần thiết:

Cân hai đĩaCân hai đĩa
Thước kẻThước kẻ

Vật liệu

1
  • Tạm thời

Công cụ yêu cầu

5

Bản thiết kế này làm ra

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...