NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Petroleum Jelly: Vacuum Residue Filtered Warm Through Bone Black
Charlie

Tạo bởi

Charlie

18. tháng Mười 2026DE
10
0
0
0
0

Petroleum Jelly: Vacuum Residue Filtered Warm Through Bone Black

Petroleum jelly (petrolatum, vaseline) is what is left of crude oil after the lighter parts are distilled off, cleaned by filtering it warm through bone black. The 1907 US Dispensatory and Thorpe (1913) describe the process: the first colourless runnings become petroleum jelly, and the later, darker filtrate is cylinder oil. The picture: white petrolatum (Wikimedia Commons).
Nâng cao
Several days

Hướng dẫn

1

Distil off the light cuts

Distil crude oil in an atmospheric column and draw off the lighter cuts. Keep the residue from the bottom.

Vật liệu cho bước này:

Dầu thôDầu thô1 t

Công cụ cần thiết:

Tháp chưng cất khí quyểnTháp chưng cất khí quyển
2

Reduce under vacuum

Distil the residue further under vacuum, heated by coils carrying superheated steam, not by direct fire. Done right, the reduced oil reaches a fire-test of 337.7 °C (640 °F) without any burnt smell.

Công cụ cần thiết:

Tháp chưng cất chân khôngTháp chưng cất chân không
Bơm chân khôngBơm chân không
3

Filter warm through bone black

Melt the reduced oil and run it onto steam-jacketed filters of fine, granular, well-dried bone black, kept at 43.3–54.4 °C (110–130 °F).

Công cụ cần thiết:

Bộ lọc có áo hơiBộ lọc có áo hơi
Bột màu đen than xươngBột màu đen than xương
Cặp nhiệt điện có đồng hồ hiển thịCặp nhiệt điện có đồng hồ hiển thị
4

Keep the clear runnings

The first filtrate is colourless; it then turns straw or lemon, and finally red. Keep the clear runnings for petroleum jelly. The red filtrate is cylinder oil, a lubricant.

Công cụ cần thiết:

Bộ lọc có áo hơiBộ lọc có áo hơi
Lon thiếcLon thiếc
5

Set the melting point

If the jelly is too soft, stir pure block paraffin into the warm oil until it has the right melting point. It dissolves completely. Pour it into tins to set.

Vật liệu cho bước này:

Sáp paraffinSáp paraffin1 as required

Công cụ cần thiết:

Cặp nhiệt điện có đồng hồ hiển thịCặp nhiệt điện có đồng hồ hiển thị
Lon thiếcLon thiếc

Vật liệu

2
  • Tạm thời
  • 1 as required
    Tạm thời

Công cụ yêu cầu

7

Bản thiết kế này làm ra

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...