NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Precipitated Silica: Hot Water Glass Carbonated, Then Acidified to pH 6.75 (Allen 1957)
Youblob · CC0
Charlie

Tạo bởi

Charlie

27. tháng Mười 2026DE
11
0
0
0
0

Precipitated Silica: Hot Water Glass Carbonated, Then Acidified to pH 6.75 (Allen 1957)

Bubble carbon dioxide through hot dilute water glass and the silica comes down as an extremely fine white powder rather than a gel. Edward Allen of Columbia-Southern made it this way as a white reinforcing filler for rubber; this follows his Example XI, which gave a powder of 148 m² per gram. Source: E. M. Allen (Columbia-Southern), US 2,805,955 (1957), Example XI. The percentages are our arithmetic; the filter, mill and indicator are ours. Picture drawn by Youblob.
Trung cấp
2 days

Hướng dẫn

1

Dilute the water glass

Take 12,850 g of sodium silicate solution holding 976 g Na2O and 3115 g SiO2 (7.6 % and 24.2 %, a silica to soda ratio of 3.19 by weight; our arithmetic). Dilute it with water to 48 litres in a stirred kettle with a heating coil and thermometer, and heat to 95 °C.

Vật liệu cho bước này:

Thủy tinh lỏng (dung dịch natri silicat)Thủy tinh lỏng (dung dịch natri silicat)12850 g
NướcNước1 as required

Công cụ cần thiết:

Thiết bị phản ứng áp suấtThiết bị phản ứng áp suất
Que khuấyQue khuấy
Nhiệt kếNhiệt kế
Cân hai đĩaCân hai đĩa
2

Carbonate for an hour

Bubble in pure carbon dioxide fast enough to add the theoretical amount in about 30 minutes, and keep going at that rate for about 1 hour. The slurry ends at pH 9.85.

Công cụ cần thiết:

Khí carbon dioxideKhí carbon dioxide
Thiết bị phản ứng áp suấtThiết bị phản ứng áp suất
Que khuấyQue khuấy
Nhiệt kếNhiệt kế
Giấy chỉ thị pHGiấy chỉ thị pH
3

Filter and wash

Filter the slurry and wash the cake twice with hot water.

Vật liệu cho bước này:

NướcNước1 as required

Công cụ cần thiết:

Phễu Büchner (bằng sứ)Phễu Büchner (bằng sứ)
Giấy lọcGiấy lọc
4

Acidify to pH 6.75

Stir the cake back into water and bring it to pH 6.75 with 400 ml of 3.5 N hydrochloric acid.

Vật liệu cho bước này:

NướcNước1 as required

Công cụ cần thiết:

Axit clohydricAxit clohydric
Bình thủy tinhBình thủy tinh
Que khuấyQue khuấy
Giấy chỉ thị pHGiấy chỉ thị pH
5

Wash out the chloride

Filter again and wash the cake with hot water until it is nearly free of chloride.

Vật liệu cho bước này:

NướcNước1 as required

Công cụ cần thiết:

Phễu Büchner (bằng sứ)Phễu Büchner (bằng sứ)
Giấy lọcGiấy lọc
6

Dry at 105 °C and grind

Dry it at 105 °C in a fan oven and grind it to a fine powder. Allen's had a pH of 8.2, 0.61 % sodium and a surface area of 148 m² per gram.

Công cụ cần thiết:

Lò sấyLò sấy
Cối và chàyCối và chày
Lọ thủy tinh có nắpLọ thủy tinh có nắp

Vật liệu

2

Công cụ yêu cầu

13

Bản thiết kế này làm ra

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...