NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
TƯƠNG LAI XANH
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Making a Bullroarer — The Oldest Instrument You Swing Through the Air
Woody

Tạo bởi

Woody

3. tháng Bảy 2026NO
0
0
0
0
0

Making a Bullroarer — The Oldest Instrument You Swing Through the Air

Make a bullroarer: a flat blade of wood on a long cord that ROARS when you whirl it around your head. Shape and bevel the blade, drill the cord hole, and swing it in clear open space. A buildable school project in the free aerophone — sound made by a spinning blade, one of humanity's oldest instruments, found on every inhabited continent.
Cơ bản
About an hour

Hướng dẫn

1

Sound from a spinning blade

A bullroarer is just a flat slat of wood on a cord. Whirl it around your head and it spins on the twisting cord, chops the air, and makes a deep pulsing ROAR. It is one of the oldest instruments humans have — used across the world for tens of thousands of years.
2

Cut the blade

Cut a flat blade about a hand-span long and two fingers wide — a long thin oval or leaf shape, a few millimetres thick. Bigger, heavier blades roar deeper; small light ones buzz higher.

Vật liệu cho bước này:

Dry Softwood BoardDry Softwood Board1 cái

Công cụ cần thiết:

Sloyd Carving KnifeSloyd Carving Knife
3

Bevel both long edges

Carve both long edges down to a slant, like a knife or an aeroplane wing — one edge sloping up, the other down. These bevels are what make the blade spin as it slices the air. Sand it smooth.
4

Drill the cord hole

Pierce one small hole near ONE end of the blade, well in from the tip so it will not split out.

Công cụ cần thiết:

AwlAwl
5

Tie a long cord

Tie a strong cord about an arm's length through the hole. A short handle loop at the far end gives you something safe to hold.

Vật liệu cho bước này:

Abaca Tying TwineAbaca Tying Twine1 cái
6

Swing it — in clear open space

SAFETY FIRST: go outside to a wide open space with NO people, animals or windows within two cord-lengths — a swinging bullroarer hits hard. Whirl it in a big circle around your head. It roars; whirl faster for a higher pitch, slower for a lower one.
7

Compendium — the free aerophone

Almost every instrument makes sound by shaking a trapped column of air (a flute), a string, a skin or a solid bar. The bullroarer does something rarer: it is a FREE aerophone — it stirs the open air directly, with no tube and no enclosed cavity at all. Here is the mechanism. As you whirl the blade, the cord winds and unwinds, so the blade spins rapidly about its own long axis; because its edges are bevelled like a propeller, the spinning aerofoil sheds a train of little swirling vortices off its edges, and each shed vortex is a pressure pulse — a puff of sound. The blade spins many times a second, so those puffs blur into a continuous rolling ROAR whose pitch rises the faster the blade spins. On top of that, swinging the whole thing around your head sweeps the sound source toward you and away again, so the roar swells and fades in a wah-wah wobble — the same Doppler effect you hear in a passing siren. This is close kin to the aeroacoustic 'edge tone' that voices every flute (a jet of air fluttering past an edge), which is why the bullroarer sits in the aerophone family alongside the bone flute and the panpipe — but where those tune a captive air column with finger holes or pipe lengths, the bullroarer simply throws sound into the open sky. Found from Aboriginal Australia to Stone-Age Europe to the Americas, it is among the very oldest human instruments, and almost everywhere it was treated as a sacred voice.

Vật liệu

2

Công cụ yêu cầu

2

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...