Hợp tác
NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Small Magnet: a Steel Bar Magnetised by Electric Induction (Work, 1892)
Ed

Tạo bởi

Ed

7. tháng Mười Một 2026FI
2
0
0
0
0

Small Magnet: a Steel Bar Magnetised by Electric Induction (Work, 1892)

A permanent magnet made from a steel bar. Work (1892) names three ways to magnetise steel: single touch, double touch, and electric induction. Induction needs no magnet to start with: wind several coils of insulated copper wire over the bar and send a frequently interrupted current through them for several minutes. A Leclanché battery will do, with wire of any size from No. 20 to 30. Bar size, steel grade and the way the current is interrupted are not given. Source: Work No. 180 (27 August 1892), p. 382, answers by G. E. B. Picture: our diagram.
Cơ bản
Several minutes (magnetising)

Hướng dẫn

1

Read the source

"Magnetising by electric induction is effected by winding over the bar several coils of insulated copper wire, and sending a frequently interrupted current of electricity through the coil for several minutes." (Work, 27 August 1892.) For a bar magnet, the answer above it adds: "The current from your Leclanché battery will do, and the wire may be of any size from 20 to 30."
2

Wind the coil

Wind several coils of insulated copper wire, No. 20 to 30, over the steel bar. Bar size, steel grade and number of turns are not given (unknown); for small magnets the same writer prefers steel of hard temper. Ours: steel bar stock, enamelled copper wire.

Vật liệu cho bước này:

Thép thanh thôThép thanh thô1 bar

Công cụ cần thiết:

Dây đồng tráng menDây đồng tráng men
Kích thước chưa rõKích thước chưa rõ
3

Send an interrupted current

Connect the coil to a Leclanché battery and make and break the current again and again for several minutes. How the current is interrupted is not given (unknown).

Công cụ cần thiết:

Ắc quyẮc quy
Dây đồng tráng menDây đồng tráng men
4

History and honest limits

By single touch, the north end of a permanent magnet is drawn from the middle of the bar to one end a dozen times or more, and the other half is stroked the same way with the south pole; double touch uses two magnets at once from the middle outwards, which is quicker and makes a stronger magnet. Steel bars can also be magnetised by stroking them on the field-magnets of a dynamo. Not given: bar size, steel grade, number of turns, how the current is interrupted.

Vật liệu

1

Công cụ yêu cầu

3

Bản thiết kế này làm ra

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...