NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO

Spring-Return Rocking Churn: Springs Under Each End Lift the Low One Back
In a rocking churn the cream runs from end to end, and its weight makes each return stroke hard work.
Daniel F. Hitt of Galena, Illinois, received US 2,800, dated 7 October 1842, for a churn whose body rocks on gudgeons at its middle, with a spring under each end connected to the body by a strap, cord or chain. As the cream "runs from end to end of the containing vessel, it acquires a momentum"; "by means of the reaction of the springs, the momentum thus acquired is rendered available in obtaining the return motion." A perforated diaphragm across the middle lets the cream through on its way.
This rung estimates the spring force, then prints the diaphragm and gudgeon bosses, bows two spring-steel strips under a rocking box, and makes butter.
Trung cấp
About 5 hours, plus printing
Hướng dẫn
1
1
Cream's moment and spring force
Cream's moment and spring force
Đang tải sổ tay Jupyter…
2
2
A rocking churn before it
A rocking churn before it
The embedded blueprint rocks a churn on a stool. Hitt hangs his on gudgeons and adds springs to help it back.
3
3
Read US 2,800
Read US 2,800
"I am aware that there is not any actual gain of power in the employment of springs in the manner designated, and they are not, therefore, used with any such view; but as the cream runs from end to end of the containing vessel, it acquires a momentum which would render the continuance of the rocking motion under the foregoing manner of suspending the containing vessel, one of much difficulty."
4
4
Print the parts
Print the parts
Print the perforated diaphragm flat (/uploads/blueprints/spring-return-rocking-churn-diaphragm.stl), two diaphragm guides (/uploads/blueprints/spring-return-rocking-churn-diaphragm-guide.stl) and two gudgeon bosses (/uploads/blueprints/spring-return-rocking-churn-gudgeon-boss.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Vật liệu cho bước này:
Sợi in PETG1 cáiCông cụ cần thiết:
Máy in 3D sợi nhựa (FDM)5
5
The rocking box
The rocking box
Take a food-safe box about 300 × 150 × 140 mm with a lid. Screw a guide inside each long side at the middle and slide the diaphragm into them, so it lifts out for washing as his did on buttons. Screw a gudgeon boss to the outside of each long side at the middle, and fit an M8 bolt through each as a gudgeon. Fix a dowel handle to one end.
Vật liệu cho bước này:
Thùng chứa cấp thực phẩm1 cái
Vít máy1 cái
Đai ốc lục giác1 cái
Chốt gỗ cứng1 cái
Vít gỗ #8 x 1"1 cáiCông cụ cần thiết:
Máy khoan pin
Bộ mũi khoan
Bộ tua vít
Mỏ lết6
6
Frame, springs and cords
Frame, springs and cords
Build a pine base with two braced posts drilled for the gudgeons, so the box swings clear. Screw a spring-steel strip to the base under each end, bowed up so its tip stands just below the box when the box is level. Tie each tip to the box's end with a cord, leaving a little slack.
Vật liệu cho bước này:
Ván thông1 cái
Băng thép lò xo1 cái
Dây dù paracord1 cái
Vít gỗ #8 x 1"1 cái
Keo dán gỗ1 cáiCông cụ cần thiết:
Cưa tay
Máy khoan pin
Bộ mũi khoan
Bộ tua vít
Kéo cắt tôn
Kẹp7
7
The patent drawing
The patent drawing
US 2,800 drawing sheet, public domain (expired patent).

8
8
Rock and make butter
Rock and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1 litre and fit the lid. Rock the box by its handle, letting the springs lift each end back; time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Vật liệu cho bước này:
Kem tươi béo1000 ml
Muối biển hạt thô1 cái
Nước1 cáiCông cụ cần thiết:
Nhiệt kế đầu dò cắm sẵn
Đồng hồ bấm giờ
Cân nhà bếp điện tử
Tô trộn thép không gỉ (lớn)9
9
A box that sticks down, springs that slap
A box that sticks down, springs that slap
Spring-return rocking churn troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Daniel F. Hitt** of Galena, Jo Daviess County, Illinois, received US 2,800, dated 7 October 1842. His body could be a trunk, box or cylinder; one end was removable, held "by wedges, screws, or otherwise"; the springs "may be varied in form, and may be made either of wood, or of metal." He did not claim the rocking churn or the suspension on gudgeons, both already used, but the manner of combining the springs with a churn that vibrates on gudgeons.
**Honest limits.** A food-safe box and spring-steel strips stand in for his body and springs. The notebook's moment is an estimate, not a measurement. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Vật liệu
13- 1 cáiTạm thời
- Tạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 2 cáiTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 1000 mlTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
Công cụ yêu cầu
12- Tạm thời
- 1 vendor sell this, none ship to you yetTạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
Bản thiết kế này làm ra
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.



