NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO

The Chalk-Line Marker: The Cord Winds on a Spindle Inside the Chalk
Carpenters and stone-cutters chalked their cord by hand, then held it tight at both ends and snapped it to mark a line to saw or cut by.
John W. Carter of New York received US 65,057, dated 28 May 1867, for "a new and useful article for the use of carpenters, stone-cutters, and others, which I term a chalk-marker": a receptacle, round or of any shape, made in two pieces and filled with chalk or other marking material, with a spindle inside on which the cord is wound, its end coming out through an opening. "As the cord is drawn therefrom it is chalked by coming into contact with the chalk or other material placed in the receptacle", and it is wound back by a crank on the spindle.
This rung works out how much chalk each draw takes, then makes the box from two tin lids with a cranked spindle, fills it, and snaps lines on a board.
Cơ bản
About 3 hours
Hướng dẫn
1
1
Chalk per draw
Chalk per draw
Đang tải sổ tay Jupyter…
2
2
A chalk-line reel before it
A chalk-line reel before it
The embedded blueprint reels the line back with a coil spring. Carter puts the reel inside the chalk so the line is chalked as it comes out.
3
3
Read US 65,057
Read US 65,057
"Heretofore the carpenter, stone-cutter, or other artisan, has made use of a string or cord which was chalked by hand and placed upon the board, stone, or other article upon which the mark was to be impressed, in order that the same might answer as a guide to saw or cut by. The string was then held rather tightly at each end and snapped so as to impress upon the board or stone a mark to serve as a guide to saw or cut by."
"A shows a receptacle for the chalk or other marking material employed. This receptacle may be made circular or of any convenient shape, and may be made of two pieces, as clearly shown in fig. 3 of the drawings. B is a spindle or shaft inserted within the receptacle A through suitable openings, and C is the cord which is wound upon the spindle or shaft, one end of the same projecting through the opening a in the receptacle."
4
4
Make the marker and snap lines
Make the marker and snap lines
**Box.** Take two tin-can lids or shallow tins that fit rim to rim, drill each in the middle for the spindle, and drill a small hole a in the rim of one for the cord.
**Spindle and crank.** Bend a steel rod into a crank at one end, pass it through both halves, and glue a wooden spool on it inside. Tie the cord to the spool and wind it on, leading its end out through the hole.
**Fill.** Half fill the box with powdered marking chalk and close the two halves with tape or a band.
**Test.** Hook the cord's end on a nail at one end of a board, draw it out across the board, hold it tight and snap it. Wind it back with the crank. Weigh the box before and after ten snaps.
Vật liệu cho bước này:
Lon thiếc2 cái
Thanh thép mềm0.2 mét
Khối gỗ cứng1 cái
Keo dán gỗ1 cái
Dây bông15 mét
Phấn đánh dấu1 cái
Ván thông1 cái
Đinh1 cáiCông cụ cần thiết:
Kéo cắt tôn
Máy khoan pin
Bộ mũi khoan
Ê tô bàn nguội
Búa
Giũa (giũa tay)
Cân nhà bếp điện tử
Dây bật mực5
5
A marker whose line comes out bare, clogs or leaks chalk
A marker whose line comes out bare, clogs or leaks chalk
Chalk-line marker troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**John W. Carter** of New York, New York, received US 65,057, dated 28 May 1867. The spindle might be provided with a spool on which the cord was wound, and could be turned by a crank or in any convenient way. He thought the invention particularly valuable for its cheapness and the rapidity of the work. His claim is the spindle and cord in combination with the chalk-receptacle.
**Honest limits.** Two tins and a bent rod stand in for his receptacle and spindle. The notebook's coating is a rough example; your weighing gives the real figure.
Vật liệu
8- 2 cáiTạm thời
- 0.2 métTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 15 métTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
Công cụ yêu cầu
8- Tạm thời
- 1 vendor sell this, none ship to you yetTạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
Bản thiết kế này làm ra
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.


