NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
The Flying Disc: A Wing Held Steady by Its Spin
Spartan

Tạo bởi

Spartan

27. tháng Chín 2026NO
3
0
0
0
0

The Flying Disc: A Wing Held Steady by Its Spin

Throw a plate and it tumbles; throw a flying disc with a snap of the wrist and it glides for tens of metres. It is two things at once: a wing, whose domed top and curved rim make lift, and a gyroscope, whose spin stops the air's pitching push from flipping it. Edward E. Headrick of La Cañada, California, assignor to the Wham-O Manufacturing Company, filed US 3,359,678, *Flying Saucer*, on 1 November 1965; it was granted 26 December 1967. Its improvement is a series of concentric ridges on the convex side near the rim, which trip the air into a turbulent boundary layer that stays attached, reducing drag and steadying the flight. This rung works out the lift, the spin-stabilised roll and the ridges' effect, and measures throws with and without spin.
Cơ bản
About 2 hours

Hướng dẫn

1

Lift, spin stability and drag

Đang tải sổ tay Jupyter…
2

Read Headrick's disc

Fig. 1 of US 3,359,678 shows the disc from the side: a central portion 12, a curved transition 16 and a rim 14, so that the bottom edge and the convex side "resemble an air foil"; a raised crown 20 in the centre; and ridges 22 on the curved surface. Figs. 2 and 4 place the ridges as concentric circles, the outermost where rim and central portion meet. The patent is candid about what it knows: the crown's contribution "has not been definitely determined", while the ridges' effect is "analogous to the effect of a 'spoiler'" — tripping the boundary layer so it stays attached and drag falls.
3

Spin that stands up

A flying disc is steadied the way a top is. The embedded blueprint shows spin resisting a toppling torque.
4

Throw with and without spin

Mark out a line on open grass. Throw a flying disc ten times with a firm backhand wrist snap and ten times pushed flat with as little spin as you can manage, at the same height and roughly the same speed. Measure each distance and note which way it rolls. Film a throw from the side at a high frame rate and count frames per revolution against a mark on the rim to estimate spin. The spun throws go farther and steadier; the flat pushes flip over within a few metres.

Vật liệu cho bước này:

Đĩa bayĐĩa bay1 cái

Công cụ cần thiết:

Thước dây cuộnThước dây cuộn
Máy ảnh sốMáy ảnh số
Đồng hồ bấm giờĐồng hồ bấm giờ
5

A disc that will not fly straight

Flying disc problems.

Flow

Loading...
6

History and honest limits

Plastic flying saucers were sold from the 1950s; **Edward E. Headrick** of Wham-O filed **US 3,359,678** on 1 November 1965, granted 26 December 1967, adding the concentric ridges near the rim. **Honest limits.** Flying-disc aerodynamics depend strongly on angle of attack and spin; the coefficients in the notebook are illustrative, not measured values for any disc.

Vật liệu

1
  • 1 cái
    Tạm thời

Công cụ yêu cầu

3

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...